ISO 9001 Training

General Description of ISO14001 Standards

2012-02-04T19:32:00.001-08:00

ISO14001 Standards requires an Environmental Policy to be in existence within the organisation, fully supported by senior management, and outlining the policies of the company, not only to the staff but to the public. The policy needs to clarify compliance with Environmental Legislation that may effect the organization and stress a commitment to continuous improvement. Emphasis has been placed on policy as this provides the direction for the remainder of the Management System.
Those companies who have witnessed ISO 9000 Assessments will know that the policy is frequently discussed during the assessment, many staff are asked if they understand or are aware of the policy, and any problems associated with the policy are seldom serious. The Environmental Policy is different, this provides the initial foundation and direction for the Management System and will be more stringently reviewed than a similar ISO 9000 policy. The statement must be publicised in non-technical language so that it can be understood by the majority of readers. It should relate to the sites within the organisation encompassed by the Management System, it should provide an overview of the company’s activities on the site and a description of those activities. A clear picture of the company’s operations.
The preparatory review and definition of the organization’s environmental effects is not part of a ISO14001 Assessment, however examination of this data will provide an external audit with a wealth of information on the methods adopted by the company. The preparatory review itself should be comprehensive in consideration of input processes and output at the site. This review should be designed to identify all relevant environmental aspects that may arise from existence on the site. These may relate to current operations, they may relate to future, perhaps even unplanned future activities, and they will certainly relate to the activities performed on site in
the past (i.e. contamination of land).
The initial or preparatory review will also include a wide-ranging consideration of the legislation which may effect the site, whether it is currently being complied with, and perhaps even whether copies of the legislation are available. Many of the environmental assessments undertaken already have highlighted that companies are often unaware of ALL of the legislation that affects them, and being unaware, are often not meeting the requirements of that legislation.
The company will declare its primary environmental objectives, those that can have most environmental impact. In order to gain most benefit these will become the primary areas of consideration within the improvement process, and the company’s environmental program. The program will be the plan to achieve specific goals or targets along the route to a specific goal and describe the means to reach those objectives such that they are real and achievable. The Environmental Management System provides further detail on the environmental program. The EMS establishes procedures, work instructions and controls to ensure that implementation of the policy and achievement of the targets can become a reality. Communication is a vital factor, enabling people in the organisation to be aware of their responsibilities, aware of the objectives of the scheme, and able to contribute to its success.
As with ISO 9000 the Environmental Management System requires a planned comprehensive periodic audit of the Environmental Management System to ensure that it is effective in operation, is meeting specified goals, and the system continues to perform in accordance with relevant regulations and standards. The audits are designed to provide additional information in order to exercise effective management of the system, providing information on practices which differ to the current procedures or offer an opportunity for improvement.
In addition to audit, there is a requirement for Management Review of the system to ensure that it is suitable (for the organization and the objectives) and effective in operation. The management review is the ideal forum to make decisions on howe to improve for the future.

Read more on ISO 14001 Standard at http://www.e-wia.com

ISO 9001 Standard - ISO 9001 Standards

2012-01-01T05:10:00.001-08:00

ISO 9001 Standard - ISO 9001 Standards

Implement ISO 14001 To Reduce Carbon Footprint

2011-08-06T21:55:00.001-07:00

Around the world people and their governments are concerned about climate change and global warming. During 2009 there is a series of international meetings preparing for the next climate change agreement to be hammered out in Copenhagen in 2010. This will be a very critical meeting because the planet is fast approaching a “tipping point” when it will be too late to pull back from very serious climate change.

So what does this mean to business and particularly small business? Small business is the backbone of economies around the world and cumulatively is responsible for an enormous amount of carbon emissions even when they are small and “just office or home based”. In fact office based business is responsible for 30% of greenhouse gas emissions. This is far more than transport which is the most obvious target for concern.

When a small business systematically addresses all its activities and looks at the carbon and other environmental impacts of each, the business can remove a large amount of waste and preventing waste is what also saves money. If you can reduce your electrical waste by 20% you will reduce both your greenhouse emissions and your power bill by that same 20%. And electrical consumption is just area that can be looked at.

If this is to work effectively the business will need to work with all employees to change the culture and raise awareness of green issues. Commencing some green training for all personnel helps them to understand and accept the reasons for the changes and know what is expected of them.

Many people feel that they want to go beyond carbon emissions because they realise that there is more to the environment than just emissions. In this case the business may want to take their planning a step further and implement and environmental management system. This works even better when an effective feedback loop is included so that when mistakes of any kind are made, the business looks at the root cause or real reason that they were able to happen then remove that cause.

Many businesses take their environmental management system a step further and have it independently audited to ISO 14001 which is the international standard for environmental management. It is important to keep the system simple and low in paper because otherwise it is unlikely to work effectively in the long term.

A simple and effective environmental management system can save a small business for more than the cost of implementing and maintaining it and it also saves time and money. Reducing your carbon footprint saves money but a full management system saves even more and achieves an internationally recognised green certification, ISO 14001.

Refer to http://www.e-wia.com for more information on ISO 14001 Standards – Environmental Management System

Introduction To ISO 14001 Standards

2011-08-06T21:54:00.001-07:00

An environmental policy should reflect the vision, intentions, philosophy, values, and beliefs of the organization with respect to the environment. Top management should put a great deal of thought and imagination into developing and crafting the policy, since it will become the code of conduct by which the organization lives and operates. The policy should be practical and inspirational, providing a framework and a compass for business and technical decisions and actions, and at the same time motivate and encourage all personnel in the organization to achieve excellence in environmental performance.

The ISO 14001 Standard specifies several requirements for the development, content, intent, and implementation of an environmental policy:

1. Top management is responsible and accountable for defining the organization’s environmental policy. They must, as a minimum, carefully review, approve, and commit to abiding by an environmental policy that has been developed for their consideration.

2. The policy must completely cover the organization’s (i.e., facility’s) range of operations, including where appropriate, raw material acquisition, transportation, packaging, and shipping of product,as well as all on-site operations that may impact the environment.

3. The policy must contain three core commitments that are ISO 14001 absolute requirements:

(i) A commitment to continual improvement of the EMS and environmental performance.
(ii) A commitment to the prevention of pollution (i.e., this means taking all reasonable steps to eliminate, or at least minimize, pollution).
(iii) A commitment to comply with relevant environmental legislation and regulations, and with other requirements to which the organization subscribes. This means the organization commits to meet local, regional, and national legislated environmental standards.

4. The policy must give direction and a framework for progress through new environmental objectives and targets that will be set during the course of implementing and maintaining the EMS.

5. The policy must be documented, and it must be implemented through the day-to-day functioning of the EMS.

6. The policy must be maintained, meaning kept up to date and relevant to current operations and conditions.

7. The policy must be communicated to all employees. This implies active, intentional efforts by the organization, led by top management, to ensure all employees know about, understand, and apply the principles, ideas, and commitments in the policy.

8. The policy must be made available to the public, i.e., it must be accessible to all members of the public who wish to see it.

In addition to the essential requirements for an environmental policy, other considerations that may be incorporated into the policy include:

Principles of sustainable development, resource renewal, and preservation • of biological diversity

A commitment to use the most effective pollution abatement technology and • equipment, consistent with economic viability of the business (i.e., BEAT – Best Economically Achievable Technology)

Use of environmental performance indicators to quantitatively monitor • progress

Life cycle thinking – consideration of ‘cradle to grave’ impacts of a • product, which would require the organization to assess cumulative environmental impacts from all stages, from design of the product; acquisition of raw materials; processing to finished product; packaging; shipment; end-use; and ultimate re-use, recycle, or disposal.

For all components of this element of the Standard to be brought to fruition, it is essential that there is clear allocation of responsibilities for developing, approving, communicating, disseminating, implementing, maintaining, and when necessary, revising the environmental policy.

Although environmental policy is the first element of ISO 14001, it may be prudent for an organization to defer finalization of the wording of their policy until work has been done to identify the scope of environmental impacts from the operation, and other planning and preliminary preparation for the EMS has been done. This will help to ensure the policy is authentic and appropriate for the organization’s purpose.

Please visit http://www.e-wia.com for more information.

Global Warming & ISO 14001 Standards

2011-08-06T21:53:00.001-07:00

Some 180 countries are proceeding toward an expected ratification of the Kyoto Protocol by the end of this year. Of the six gases it will control CO2 is by far the largest contributing nearly 90% of the global warming impact. The primary source of CO2 is the burning of fossil fuels. Therefore the focus on energy will continue to increase.

Throughout the world different methods are being used to encourage reduced energy use. Japan has enacted the Energy Conservation Law in 1999 mandating huge efficiency improvements by 2004 for nearly all air conditioning products. The U.S. has revised ASHRAE Standard 90.1 for buildings to raise the minimum COP level for centrifugal chillers from the current value of 5.2 to 6.1 effective in October 2001. DOE and Green Seal have revised their recommended efficiency levels to an even higher level of 6.27.

Some countries use laws. Others use codes and standards. An increasing number of countries are using environmental costing which increases the price of energy thereby increasing the financial attractiveness of high efficiency products. European countries have been using such “carbon taxes” for more than a decade. However a rapidly growing trend in developing countries is the reduction of subsidies to energy industries “so prices more accurately reflect environmental impacts” according to OECD’s Environmental Strategy for the First Decade of the 21st Century.

China has shown leadership by reducing subsidies to the coal industry from $24.5 billion in 1990 to $10 billion in 1996 resulting in 7% emissions reduction while seeing a solid economic growth of 36%! China is now moving aggressively into environmental costing with the just announced (1/13/2002) 5-year environmental plan that commits 700 billion yuan ($84 billion) to help protect the environment. The government will provide the fist 65 billion yuan to initiate the project but will apply the “polluter pays” principle for the rest. The “environmental protection authorities will collect funds from the pollution-producing companies”. The impact on the price of energy is not known at this time. However it is clear that the addition of environmental costing will increase energy prices. According to a European Research Commission Report of July 2001 “The cost of producing electricity from coal or oil would double if costs such as damage to the environment and health were taken into account”.

The global movement to high efficiency is accelerating just like the rate of temperature increase. But this is not all that is changing. This second environmental threat of global warming is making it clear that we need to give combined consideration to ozone depletion and global warming. But more important is the need to focus on the real issue which is the total environmental impact not address each individual environmental threat in isolation. This includes the concept of environmental risk exposure, which recognizes that there are other environmental threats that are less well understood today. However, there are “no regrets” decisions we can make today (such as minimum refrigerant charge, minimum atmospheric life refrigerants, etc.) to minimize these risks.

Combined consideration would place more emphasis on reducing the use of CFCs, which are still being produced in developing countries until 2010 in accordance with the Montreal Protocol. Little attention is being given the large contribution to global warming from CFCs. Actions which cause confusion and delay the phaseout of CFCs cause increased environmental damage rather than lessening the environmental impact.

The other rapidly changing factor in the HVAC industry is the shift to becoming a hermetic industry, where refrigerant is contained throughout the life of a chiller and recycled for further use when the chiller is replaced. This simple understanding that “if it doesn’t get into the environment it does no harm” is a powerful argument, which will lead to the continued use of the most efficient refrigerants in such closed hermetic applications as chillers. In just 15 years annual refrigerants emissions from chillers have been reduced from 25% to well below 1% today. This defines a whole different world than that which existed when the Montreal Protocol was crafted some 15 years ago.

But perhaps the most important change coming to our industry is the realization that there are no new or “perfect” refrigerants waiting to be discovered. There are eight elements that can be combined for use in a vapor compression cycle. All feasible combinations of these eight have been evaluated. The reality is “what we have now is all there is”.

This recognition is why we are now seeing a shift from the search for a perfect refrigerant to a search for the right refrigerant(s) for the right application. Said another way, the highest efficiency refrigerants for the lowest emissions applications. Many in our industry call this “Responsible Use”.

It is not difficult to become a believer in global warming. According to the U.S. National Climatic Data Center 2001 was the second warmest year on record and it was the 23rd consecutive year of above normal temperatures. Perhaps most troubling is the fact that the rate of temperature increase is accelerating. Add to this the data just released from insurer Munich Re stating that deaths from natural disasters were more than double in 2001 versus 2000 and insured losses were up more than 50%.UNEP estimates that the extra economic costs of disasters attributable to global warming are running at more than $300 billion annually.
Some 180 countries are proceeding toward an expected ratification of the Kyoto Protocol by the end of this year. Of the six gases it will control CO2 is by far the largest contributing nearly 90% of the global warming impact. The primary source of CO2 is the burning of fossil fuels. Therefore the focus on energy will continue to increase.
Throughout the world different methods are being used to encourage reduced energy use. Japan has enacted the Energy Conservation Law in 1999 mandating huge efficiency improvements by 2004 for nearly all air conditioning products. The U.S. has revised ASHRAE Standard 90.1 for buildings to raise the minimum COP level for centrifugal chillers from the current value of 5.2 to 6.1 effective in October 2001. DOE and Green Seal have revised their recommended efficiency levels to an even higher level of 6.27.
Some countries use laws. Others use codes and standards. An increasing number of countries are using environmental costing which increases the price of energy thereby increasing the financial attractiveness of high efficiency products. European countries have been using such “carbon taxes” for more than a decade. However a rapidly growing trend in developing countries is the reduction of subsidies to energy industries “so prices more accurately reflect environmental impacts” according to OECD’s Environmental Strategy for the First Decade of the 21st Century.
China has shown leadership by reducing subsidies to the coal industry from $24.5 billion in 1990 to $10 billion in 1996 resulting in 7% emissions reduction while seeing a solid economic growth of 36%! China is now moving aggressively into environmental costing with the just announced (1/13/2002) 5-year environmental plan that commits 700 billion yuan ($84 billion) to help protect the environment. The government will provide the fist 65 billion yuan to initiate the project but will apply the “polluter pays” principle for the rest. The “environmental protection authorities will collect funds from the pollution-producing companies”. The impact on the price of energy is not known at this time. However it is clear that the addition of environmental costing will increase energy prices. According to a European Research Commission Report of July 2001 “The cost of producing electricity from coal or oil would double if costs such as damage to the environment and health were taken into account”.
The global movement to high efficiency is accelerating just like the rate of temperature increase. But this is not all that is changing. This second environmental threat of global warming is making it clear that we need to give combined consideration to ozone depletion and global warming. But more important is the need to focus on the real issue which is the total environmental impact not address each individual environmental threat in isolation. This includes the concept of environmental risk exposure, which recognizes that there are other environmental threats that are less well understood today. However, there are “no regrets” decisions we can make today (such as minimum refrigerant charge, minimum atmospheric life refrigerants, etc.) to minimize these risks.
Combined consideration would place more emphasis on reducing the use of CFCs, which are still being produced in developing countries until 2010 in accordance with the Montreal Protocol. Little attention is being given the large contribution to global warming from CFCs. Actions which cause confusion and delay the phaseout of CFCs cause increased environmental damage rather than lessening the environmental impact.
The other rapidly changing factor in the HVAC industry is the shift to becoming a hermetic industry, where refrigerant is contained throughout the life of a chiller and recycled for further use when the chiller is replaced. This simple understanding that “if it doesn’t get into the environment it does no harm” is a powerful argument, which will lead to the continued use of the most efficient refrigerants in such closed hermetic applications as chillers. In just 15 years annual refrigerants emissions from chillers have been reduced from 25% to well below 1% today. This defines a whole different world than that which existed when the Montreal Protocol was crafted some 15 years ago.
But perhaps the most important change coming to our industry is the realization that there are no new or “perfect” refrigerants waiting to be discovered. There are eight elements that can be combined for use in a vapor compression cycle. All feasible combinations of these eight have been evaluated. The reality is “what we have now is all there is”.
This recognition is why we are now seeing a shift from the search for a perfect refrigerant to a search for the right refrigerant(s) for the right application. Said another way, the highest efficiency refrigerants for the lowest emissions applications. Many in our industry call this “Responsible Use”.

Demographers now project that, in the near future, more people are going to live in cities than in rural areas, and this will be the first time in the history of the world that this has been the case. As a result, while there are many different levels of society and business where global warming needs to be dealt with, cities are going to take an ever expanding role. It’s easy for local governments to pass the buck to state, provincial, or national governments, but this isn’t a sustainable practice. If we’re going to successfully fend off the apocalyptic-scale global warming that many scientists now predict, cities are going to have to take the lead. As a start, here are some basic things that municipal governments can do.

Green roofs: If you fly over any major metropolitan area, you’ll likely see a few patches of green where there are parks or tree-lined streets, but for the most part you will see nothing but bare rooftops dominating the landscape. When you think about it, that’s a lot of space that is simply going to waste. In the city of the future, we’re going to increasingly put all this excess space to use for green purposes. There are a few things we can do up there, including:

• Having solar and wind power stations on roof tops can help make buildings and cities in general cleaner and more energy efficient.

• Rooftop gardens can help residents grow their own produce rather than having to buy from energy-inefficient sources.

• Rooftop trees and greenhouses help balance out deforestation while cleansing smog-filled urban atmospheres.

Expanded public transit: When it comes to moving people around, the private automobile is the most energy-inefficient vehicle ever created. Things like buses and trains are not without emissions, but they have a much lower pollution-per-person ratio. Many cities throughout the developed world are decades behind in this respect and need to catch up fast in order to do their part. We need more rail-based transit systems, and many cities would do well to expand their bus networks.

Pedestrian and bicycle infrastructure: In many cities, it’s a sad state of affairs for pedestrians. If you want to travel on foot, you too often have to deal with landscapes that make walking very difficult, not to mention the culture of motorists who drive fast and aggressively and are not used to sharing the road. For a more sustainable future, we need more pedestrian-friendly landscapes, and it also doesn’t hurt to encourage people to take their bicycles.

Better recycling programs: We have come a long way in the realm of recycling, but too many cities are still stuck in the 90s with their recycling technology. We now have the ability to recycle a much broader spectrum of materials, including plastic bags and soiled containers, but many cities haven’t taken the steps necessary to implement these technologies. This investment, which is relatively small in the big picture, can have hugely positive effects in the long run.

Fuel-efficient fleets: Most cities rely on large fleets of vehicles to provide their basic services. From buses, to sanitary trucks, to road maintenance equipment, all of these vehicles can be made more efficient with new technology. Of course, it costs a lot of money to replace these vehicles, but all vehicles do need to be replaced with newer models sooner or later, and cities should use these opportunities to make their investments more efficient, rather than purchasing the same old polluting vehicles.

As individuals, each of us can contribute to the solution. As a start, we can choose to drive vehicles that are more fuel-efficient. We can plant more trees. We can recycle where practicable. We can take stock of our energy consumption practices and try to reduce them by some factor.

But, what steps can your organization take to help? The answers are varied, depending upon the size of the organization and the related environmental aspects and impacts. But no matter how simple or complex the business, each can benefit from the implementation of a management system based on ISO 14001:2004. This international standard has as its focus the prevention of pollution, accomplished by a teamwork approach to identifying those aspects of the organization’s processes that have the potential for harming the environment and the development of ways to reduce or prevent this harm. In the process, many organizations have found ways to reduce costs by elimination of scrap, changes to their waste disposal processes or reduced use of natural resources. It is the application of the system approach that has proven to be successful. And, once the system is in place, it is logical and beneficial to have that system certified and registered. This provides added assurance that the management system remains effective and also provides public recognition to numerous stakeholders that your organization is committed to the prevention of pollution.

Go to http://www.iso9001store.com for more information on ISO 14001 Standards.

Internal Audit In ISO 9001:2008 Standards

2011-06-15T06:44:00.000-07:00

ISO stands for International Organization for Standardization. ISO is a non governmental organization based in Geneva Switzerland which promulgates worldwide commercial and industrial standards. TheISO 9000 is a family of standards set for quality management systems. If a company has the ISO 9001: 2008 certificate, they are said to be ISO 9001:2008 compliant and would have followed a formal procedure of training and auditing to get the certificate.

Courses usually take place in a classroom setting, but some can be conducted online, like the course provided by the Telecom Quality Management System. In general, courses cover customer satisfaction, quality control, quality assurance and ensuring supplier quality. Courses often take the form of lectures and case studies to enable students to understand international standards and follow processes and procedures. Some courses train students on ISO auditing procedures, ISO quality management techniques and ISO certification. The American Society for Quality provides a program which leads to certification.

Companies that produce products, services or software can use ISO 9001 processes to improve their business operations to ensure that the products they produce are of the highest quality. Candidates trained in ISO 9001 standards are able to identify problems, create solutions and therefore implement good quality management practices. Candidates are also able to examine work flow, eliminate waste and maximize performance and effectiveness, ultimately helping to improve operations within the company.

Effective ISO 9001:2008 training prepares students to deal with the issues that can arise due to non conformance with standards. Such issues may include manufacturing errors. The development of quality control mechanisms according to the standards helps to guard against the risk of damaged products being shipped to customers.

Read more on ISO 9001:2008 at http://www.iso9001store.com

Integrating Management Systems Within The ISO Standards

2011-05-24T05:30:00.000-07:00

Today’s free market economies increasingly encourage diverse sources of supply and provide opportunities for expanding markets. Fair competition needs to be based on identifiable, clearly defined common references that are recognised from one country to the next. A standard, internationally recognised, developed by consensus among trading partners, serves as the language of trade. The International Organisation for Standardisation (ISO) has developed around 8?700, mostly technical related standards on this basis. Standards Series such as ISO 9000, ISO 14000 and what is to be known as ISO 18000 and ISO 26000 are Management related. These standards contain generic guidelines for Management Systems in the area of Quality, Environment, Occupational Health & Safety and Human Resources.

ISO is a word derived from the Greek isos, meaning “equal”. ISO 9000 Standards are developed and updated by the International Organisation for Standardisation which has around 150 member bodies. A member body of ISO is the national body “most representative of standardisation in its country”.(eg. Germany – DIN, USA – ANSI, Australia – SAA).
More than 50 countries, as well as the European Community have adopted ISO 9000 which is recognised internationally as a benchmark for measuring quality in a trade context. Since its first issue in 1987, approximately 430?000 companies have been using ISO 9000. Being a standard coming from an organisation that is usually involved in the development of technical standards, ISO 9000 is often regarded as a document that belongs in the hands of a technician exposed to production line quality control. At a closer look, however, ISO 9000 Standard Series provide guidance in the development and application of Management Systems as well as Quality Control in Manufacturing and Administration.

ISO has been developing a number of Management System Guidelines for various aspects of business. The most recent are the ISO 14000 Environmental Management System Guidelines. This is an international standard that will affect business in the near future. ISO 14000 has been designed to integrate with ISO 9000. However, apart from international standards there are local standards a company has to comply with. To remain compliant with local standards, further manuals and/or procedures are required (eg. lifting procedure in a warehouse to satisfy Work Safety requirements). A company may have several Manuals describing its Management Systems (eg. Human Resources, Quality, Security, Health/Safety, Finances). An overall link between the systems is often missing which makes the monitoring and the assessment of effectiveness difficult. Double handling of information, contradicting instructions, high maintenance costs, administrative excess and lack of overall transparency are common results.
ISO 9000 Standard Series for Quality (of) Management Systems provide generic guidance for the development of an overall Management System, ISO 14000 provides guidance for Environmental Management, etc. Transparency and monitoring of all business activities can be achieved by integrating all systems into one.
Complaints that ISO 9000 is paralysing operations and, that it does not reflect reality are usually a result of not clearly understanding how the standard can be properly structured to address the needs of a company. ISO 9000 can be structured by focusing on “best practice” process rather than the standard, by fitting the standard to the process and not the process to the standard. Having recognised this, ISO has been working on a new structure for ISO 9000, called “Vision 2000?, taking a process orientated approach to ensure that “best practice” as well as several standards can be addressed within one system. Focusing on process allows the development of a practical “working document”, providing an effective management tool. Having learned from the past, the trend to Process Orientated Management Systems started about three years ago in Europe and is finding increasing approval from certification bodies.Every company has its own culture and key individuals.
The business environment influences processes in certain ways (eg. employee market, laws, infrastructure, client, etc.)
To ensure competitiveness a company needs to ensure adequate flexibility in their system to effectively respond to changes in the business environment.
An effective system is a lean system that incorporates all necessary functions, controls of activities and “best practice” without being caught up in detail.
An effective system must also be flexible enough to enable the proper controls on outsourcing and sub-contracting of activities (eg. production, administration, service, etc.)

Kindly go to http://www.iso9001store.com for more information on ISO 9001 Standards.

ISO 9001 Standards Training DVD

2011-05-24T05:29:00.000-07:00

In our business we often need to describe our policy and practice regarding quality of service, responsibility towards environment and employees health to our clients. There are three set standards i.e. ISO 9001, ISO 14001 and OHSAS 18001 accepted globally.

ISO 9001 is the internationally recognised Quality Management Standard for all types of organisations. It’s all about managing your processes and continually improving the way you do things. It doesn’t require you to change any of your operating procedures or do anything that isn’t good practice. It simply asks you to “Say what you do, and do what you say”.

ISO 9001 is by far the world’s most established quality framework, currently being used by over ¾ million organizations in 161 countries, and sets the standard not only for quality management systems, but management systems in general.

Having ISO 9001 certification demonstrates that your organisation is well managed, knows where it is going and has a plan to get there. Also, having a plan means you are far more likely to succeed.

Certification to the ISO 14001 Standard demonstrates your ‘Green’ credentials to the world at large and your customers in particular. It gives them the confidence to know that behind the certificate there is an organisation that is aware of its environmental responsibilities and is doing everything it can to minimise any adverse impact.

Visit http://www.iso9001store.com more more information.

Why Is ISO 9001 Standards Important?

2011-02-05T04:04:00.000-08:00

Industrialization has completely gone under a drastic change with the growling levels of development. With the advancement in technology, there is huge competition between major players. Thus, to stand up with such high competition and developments, all sectors must produce apt services and products according to the needs of the consumers.

This could be just that the quality management system intends continual development in the company beginning from the purchasing department, design, marketing, production, and various other departments in order to provide the best of services and products, which is harmless to both the consumers as well as the environment.

To maintain the quality standards, one needs to get International Organization for Standards (ISO) that symbolizes the quality management standard at international standards. For every company, which deals in facilitating any type of services and goods, it is very important to get certified from ISO 9001:2008.

ISO 9000 is a group of standards for the quality management system and is managed or administered by the certification and accreditation bodies. Few of the requirements in the ISO 9001, one of the standards from the group or family of ISO 9000 include:

A set of methods, which covers all the main and essential processes in the industry
Monitoring each and every process to make sure that it is effective
Maintaining adequate records
Checking all outputs for any kind of defects with corrective and appropriate action where required
Regularly reviewing individual procedures and quality system as well for its effectiveness
Last but not the least, facilitating continual improvement

An organization or company, which has been autonomously certified and audited to be in conformity with the ISO 9001:2008, might publicly state that it is certified with International Organization for Standards 9001:2008 or ISO 9001:2008 registered. Nevertheless, certification with ISO 9001:2008 standards does not ensure conformity and thus the quality of end services and products, to a certain extent certifies that reliable and dependable business procedures are being applied.

Besides, to get the ISO 9001:2008 certifications, one is required to accomplish various obligations of quality control. Few of the vital clauses that must be put up to avail the ISO 9001:2008 include knowledge, range, expressions, identifications, resource management, conscientiousness, analysis, product recognition and measurement. To avail the international standards for organization 9001 certificates, one can easily get them from several certificate providers.

The providers provide the certificate once they have carefully analyzed the production and various other production departments that include quality control standards. In addition, ISO 9001:2008 is offered only when the parent company is pleased and convinced with the output. Hence, for those individuals or businesses that are looking forward to seek ISO 9001:2008 certificates, they must make sure that they fulfill all the required industrial norms.

The practice of ISO 9001:2008 for successful operation and improved customer contentment shows the way to retention of the services and goods for a longer period. With the application of ISO 9001:2008, one can also experience decreased audits and improved marketing. ISO 9001:2008 assists in endorsing international deals, revenue that directs to worker enthusiasm and self-esteem inoculation of types.

For more information on ISO 9001 Standards, kindly visit http://www.iso9001store.com

Quality Product By ISO 9001 Certification

2011-02-05T04:03:00.001-08:00

The International Organization for Standardization (abbreviated to ISO) conducts standards for institutes which are organized in more than 159 countries across the globe. The ISO has its head office in Geneva, Switzerland. In simple terms ISO certification is given to an organization in order to indicate that the organization has good standards and it is working well with its employees and its customers. The International Organization for Standardization is not a Government organization. It acts as a bridge in between the private and the public sector and brings out good standards for many organizations across a variety of industries.

There are many standards that are released by the ISO. One of the standards is the ISO 9001 certification. The reason why an organization may require the ISO 9001 certification is to ensure that the company has a very good quality management system in place and can then confirm this to their customers. Also, if an organization has ISO 9001 certification it can ensure to its suppliers that it is following a good standard regarding it’s quality management system. The main two reasons for going for the ISO 9001 certification are to show how effective a company’s production is as well as helping to give good recognition for other new markets concerning their company standards.

The main aspects of ISO 9001 certification are maintaining good quality of products and also to maintain low cost and high efficiency for the production process. The primary thing that is checked with ISO 9001 certification is to confirm that the quality goals that are set out in the company’s quality management system are met. It is also important that once a company gets its ISO 9001 certification they should be seeking to improve all the time. There should be an increase in productivity as well. The goals of ISO 9001 certification are to increase the efficiency, increase the revenue, establish proper decision making, achieve good supplier relationships and prepare documentation work about the company plans, a regular improvement process should be in place and on the whole a complete customer satisfaction system should be implemented.

The ISO 9001:2008 certifications have a few revised benefits and let us see a few of them in detail. The goals of the ISO 9001 are the same for all year where as a few enhancements will be added for every year. Likewise the ISO 9001:2008 certification’s benefits include cost reduction in the production of goods, greater customer satisfaction, improved product efficiency and improved productivity, reduction in the scrap and waste products. The aim is to prepare a quality product which passes the goals of the quality management system. The ISO 9001 certification itself should result in the reduction of customer claims, a proper delivery to the customer on time, providing great reliability, safety and quality to the products. So on the whole the ISO 9001 certification has many good policies for the organization and they are also ensuring that the quality of the product should be good, efficient and cost effective, with an increase in the productivity.

Kindly visit http://www.iso9001store.com for more information.

ISO 9001 Standards Certification

2011-02-05T04:02:00.000-08:00

The ISO 9001 accreditation is part of the International Organization for Standardization 9000 standards. They are awarded to businesses for quality. The ISO 9001 is recognized worldwide as an award for a company’s internal quality management or actions that the company takes to ensure the product or service they provide is of the highest quality. Customer satisfaction is a major factor in whether a company will be awarded an ISO 9001 accreditation.
The International Organization for Standardization in Geneva, Switzerland publishes thousands of international standards to help companies throughout the world more efficiently do business with one another. The 27 page ISO 9001 standard is focused on defining minimum business practices for the production and delivery of a company’s products and services through the implementation of a formal “quality management system”, or QMS. An ISO QMS is made up of certain processes, documentation and other formal practices that control internal company operations to ensure customer requirements are consistently met.
To pass an audit, an organization must follow these guidelines:
• Develop a Quality Management System (QMS) manual.
• Develop the procedures required by the ISO Standard.
• Determine the additional processes and procedures that are needed by the organization to perform work and satisfy the requirements in the ISO Standard.
• Operate in accordance with the organization’s documented QMS.
• Provide evidence that the organization is operating according to the QMS.
The achievement of an ISO 9001 certification is a milestone in demonstrating to your customers that you have implemented a reliable system of producing and delivering your products and services. The focus of this “system” is twofold: providing consistent products and services; and continual improvement in your processes leading to better results.
The ISO 9001 certification is granted by a third-party auditing firm called a Registrar who specializes in quality system auditing. There are a wide variety of Registrars located in every ISO participating country. Some firms have offices internationally; others have a more regional focus. The selection of your Registrar is one of the more important decisions you will make to ensure the best alignment with your type of business, your location(s) and overall cost of maintaining the certification.
The initial certification audit is conducted in two parts. The Stage 1 audit is a general review of your QMS documentation to ensure you have addressed all of the requirements of the standard. Depending upon the size of your business, this can be conducted in a one to two day visit to your facility or virtually via phone. Any discrepancies noted during the Stage 1 audit will be documented in a formal report and must be corrected before the Stage 2 audit.
The main part of the ISO audit is the Stage 2 audit which is always conducted onsite at your location(s) and will be focused on the implementation and effectiveness of your QMS. During this audit which can take 1 day (for very small companies) to several days, the auditor(s) will tour your company, speak to managers and employees, and review documentation and records (along with any Stage 1 discrepancies) to ensure that your system is fully implemented. If non-conformances are found, they will be documented in a formal report for correction. Following the Stage 2 audit, you are generally given thirty (30) days to submit corrective action plans for all audit non-conformances. Once corrective actions are received, your certification is complete and your certificate is issued.
In order to maintain the certification, you will participate in an annual surveillance audit from your Registrar where they confirm that you are maintaining your QMS. Every third year, a more comprehensive re-certification audit is conducted, similar to the initial certification audit.

Visit http://www.iso9001store.com for more information.

Global Warming & ISO 14001 Standards

2011-02-05T04:01:00.000-08:00

• Having solar and wind power stations on roof tops can help make buildings and cities in general cleaner and more energy efficient.

• Rooftop gardens can help residents grow their own produce rather than having to buy from energy-inefficient sources.

• Rooftop trees and greenhouses help balance out deforestation while cleansing smog-filled urban atmospheres.

Go to http://www.iso9001store.com for more information on ISO 14001 Standards.

How To Get An Iso 9001 Accreditation

2011-02-05T04:00:00.001-08:00

The ISO 9001 accreditation is part of the International Organization for Standardization 9000 standards. They are awarded to businesses for quality. The 9001 is recognized worldwide as an award for a companys internal quality management or actions that the company takes to ensure the product or service they provide is of the highest quality. Customer satisfaction is a major factor in whether a company will be awarded an ISO 9001 accreditation.

There are many benefits for a company to have an ISO 9001 accreditation and the most important being that it gives a great impression of the business. If companies are planning to tender for a contract with a Local Authority for example, it can be one of the required criteria. Some of the other benefits include continuously detailed and quality driven running of your business, an improvement in customer satisfaction, improved business status, and an increase in staff motivation. A business can even integrate the ISO 9001 with other ISO standards such as those for health and safety, environmental and information security to further enhance the status of the company. The ISO standards all integrate together effortlessly so a business should have no problems maintaining ISO standards in all areas.

To get an ISO 9001 accreditation, your business will have to prepare and look for help and advice. You can check the ISO website for any advice on how to begin the process. You will need to find out everything you can before applying to see what you need to implement into your business. Find out as much as possible as this will ease your application process. Once you have decided to apply, a Lead Assessor will be appointed to you to help guide you through the whole process. Your lead assessor will be your first point of contact throughout and he or she should be able to answer any questions you have.

Stage one of the application process is the pre-audit assessment. This is where your lead assessor will visit your premises and make a report of everything you need to implement in order to gain your accreditation. After the visit you will be given a detailed report on all the necessary actions which need to be taken. You can then set a deadline for completing the required actions.

The second stage is the audit assessment. This will be set up for you by your lead assessor and an auditor will visit your premises and will notify you of any recommendations before leaving. If the auditor recommends that you be awarded the ISO 9001 accreditation, it will be confirmed shortly afterwards formally. You will then receive your ISO 9001 certification. However, the process does not end there. If you are awarded the certificate it is up to you to maintain the standards of quality that you have set. You will be continually assessed to ensure that your standards are maintained. You will still have the services of your lead assessor to help you to meet any requirements which are set down by the ISO 9001 standard.

ISO 9000 Standards Certification and Registration

2010-11-13T06:36:00.000-08:00

ISO 9000 Standards Certification and Registration

The International Standards Organization is responsible for two major sets of requirements that relate to an overall quality management system to be used by businesses. The ISO 9000 family of standards is the primary set of requirements for most businesses.

Quality management by definition address that the organization does certain things to “fulfill the customer’s quality requirements and applicable regulatory requirements while aiming to enhance customer satisfaction, and achieve continual improvement of its performance in pursuit of these objectives”.
ISO 14000 address the environmental management to minimize harmful effects to the environment. Again, it is a quality management system designed to “achieve continual improvement of its environmental performance.

ISO certification 9000 is the most common. So, let’s take a look at what ISO certification entails and what it means. To become certified, a quality management system must be in place that meets the requirements of the ISO standard. This begins with the business recognizes the requirements and developing a quality system to meet their needs at the same time they meet the requirements.

ISO 9000 certification and ISO 9000 registration are two different entities, though they are often used interchangeably. To achieve ISO certification 9001 , an independent registrar is hired to audit the quality system for thoroughness and compliance to all the standards. When this is accomplished, the business is offered a certificate stating that the quality system conforms to standards within the particular standard.

ISO registration means that the certification has been recorded in its client register. Because most companies have been certified and in turn registered, the terms are offed interchanged in general use. While the term “certification” is the most widely used, “registration” used in North America. Both are completely acceptable, because the business has fulfilled the requirements set forth by ISO.

Risk Management In ISO 9000 Standard

2010-11-13T04:37:00.002-08:00

Risk Management In ISO 9000 Standard

In each human endeavour there is an element of risk; personal, project or financial, or a combination of them all. The job of the responsible individual is to identify the risk and act accordingly. We all do these ‘risky’ things, almost daily, aware that we are taking a risk. Rather than staying away from the risk we become adept at identifying it and having a strategy for dealing with it if the risk materialises. This is what risk management is about, and is an ability that is important in virtually every endeavour.

The popular misconception that risk management is difficult or complicated stems from the bureaucratic methodology of some system-oriented organisations and managers. It is neither complicated or bureaucratic, and need not be. Risk management is basically a simple proposition with a complexity dictated by the nature of the situation to which it applies – usually a project, and the parties involved. In its basic form risk management involves:

1. Identifying risk – Looking for anything that threatens the successful completion of the project against the original requirement. Risks can be environmental, organisational, technical, legal, economic or commercial.

2. Counteracting risk – Taking action to remove or reduce the probability of a risk being realised. The response depends on the nature or seriousness of the risk.

3. Acting when the risk event occurs – Invoking whatever contingency measures were devised for the risk that has materialised.

And for this to happen needs:

4. Monitoring at all stages – This typically means documenting a risk assessment in a profile that identifies the risk, the probability of its occurrence, and the impact if it does materialise. Factors that score paramount are those that require the greatest attention and monitoring. A good risk manager will devise contingency plans that reduce either the probability or the impact of these occurrences, and so remove them from the scene.

Working within a formal structured management system similar to that defined by ISO 9000 requires the application of risk assessment practices to satisfy the requirements of the Standard. Auditors of such systems may not find specific references to risk management in these areas even though the identification of potential failure (8.5.3) is wholly concerned with a topic that is nothing less than risk management.

Well managed risk taking is an essential feature of any forward thinking enterprise, since risk is an element of any progression or advancement. It is the adoption of effective risk management in conjunction with the continuing need to drive forward from a comfortable position that leads to progress and advancement. Doing what we always do purely because the risks appear to be negligible or are well known is to be ‘risk averse’, and for progressive organisations cannot be acceptable. Neither is it acceptable to pursue new ideas without an understanding of their potential benefit, proper planning, a clear idea of the threats to these benefits being achieved , and a strategy for dealing with them should they materialise. We need to manage in a manner that is neither predictable or reckless. Risk assessment is an essential tool to support this strategy.

ISO 9000 Document Management Software System

2010-11-13T04:37:00.001-08:00

ISO 9000 Document Management Software System

Today’s manufacturing companies that seek ISO 9001 compliance-(regardless of their motivation to do so) probably don’t find it that difficult to create intelligent documentation. After all, a few days with a good consultant or a quality manager can take care of document creation. The problem lies in the gap between what employees are doing and what employees are supposed to be doing (in terms of adhering to documentation) and the gap between the manner in which processes are being implemented and the manner in which they should be implemented ( in accordance with documentation). In other words, the problem lies in the way processes are strategized and applied and in the way employees commit to standards when compared against existing documentation. How can a company overcome these issues? The answers may be simpler than you think.

Automation is the Answer for ISO Control
If your underlying processes are poorly strategized then an automated document management software system won’t be of much use. However, once the processes have been effectively planned (and applied) a document management software system can speed process-to-process management by leaps and bounds. Companies that automate not only to comply with ISO standards but to generate more revenue by performing less administrative labor save weeks and even years worth of time just by automating their processes and documentation control with a document management software system.

Making Amends
The right document management software system and ISO document control would also allow companies to find deviations and nonconformance events faster and move those events to resolution phases in a small fraction of the time they were originally routed—if they were routed at all. Some ISO 9000 document management software systems may even be combined with a CAPA QMS solution. This is especially valuable when determining the root cause of major to minor deviations.

A Document Management Software System and Employee Training
ISO standards do not require any type of automation but ISO standards lend themselves to automation in a way that’s quite remarkable. Take for instance the following document management requirements from the official ISO 9001 International Standard.

ISO 9001 Section 4.2.3
ISO standards make it clear that ISO 9001 “approved” companies must define (i.e., document) how they will approve documentation, how they will identify documentation changes, how they will update/reapprove revised documentation, how external documentation will be managed and how assurance will be provided that documentation will be available when it is required. 1 And that’s only a shadow of things to come! A document management software system designed for strict compliance can automate the approval of documentation, the identification of document changes, updates and reapproval notifications, external documentation management and high-level document security. Some solutions also integrate training and online exams as well.

How Much Could You Save?
Chances are high that automation will save you thousands, tens of thousands or even hundreds of thousands of dollars annually depending on the size of your company. Just foregoing a typical document routing process (a manual process) can save many employees fruitless trips back and forth from one office to another. Who wouldn’t want to avoid those time consuming searches through 3-ring binders and lost documentation due to employee absence or neglect?

Conclusion
Regulation and control are the future for manufacturing. Gone are the days of free experimentation and a blind eye toward material waste. Today is the day of premeditated design, quality assurance and web-based automation. If your company plans to be, or already is, compliant with ISO 9001 standards why not consider automating those ISO 9001 controls with a document management software system.

How To Get ISO 9001 Certified

2010-10-27T06:06:00.001-07:00

How To Get ISO 9001 Certified

The ISO 9001 accreditation is part of the International Organization for Standardization 9000 standards. They are awarded to businesses for quality. The ISO 9001 is recognized worldwide as an award for a company’s internal quality management or actions that the company takes to ensure the product or service they provide is of the highest quality. Customer satisfaction is a major factor in whether a company will be awarded an ISO 9001 accreditation. The International Organization for Standardization in Geneva, Switzerland publishes thousands of international standards to help companies throughout the world more efficiently do business with one another. The 27 page ISO 9001 standard is focused on defining minimum business practices for the production and delivery of a company’s products and services through the implementation of a formal “quality management system”, or QMS. An ISO QMS is made up of certain processes, documentation and other formal practices that control internal company operations to ensure customer requirements are consistently met. To pass an audit, an organization must follow these guidelines: Develop a Quality Management System (QMS) manual. Develop the procedures required by the ISO 9001 Standard. Determine the additional processes and procedures that are needed by the organization to perform work and satisfy the requirements in the ISO Standard. Operate in accordance with the organization’s documented QMS. Provide evidence that the organization is operating according to the QMS. The achievement of an ISO 9001 certification is a milestone in demonstrating to your customers that you have implemented a reliable system of producing and delivering your products and services. The focus of this “system” is twofold: providing consistent products and services; and continual improvement in your processes leading to better results. The ISO 9001 certification is granted by a third-party auditing firm called a Registrar who specializes in quality system auditing. There are a wide variety of Registrars located in every ISO participating country. Some firms have offices internationally; others have a more regional focus. The selection of your Registrar is one of the more important decisions you will make to ensure the best alignment with your type of business, your location(s) and overall cost of maintaining the certification. The initial certification audit is conducted in two parts. The Stage 1 audit is a general review of your QMS documentation to ensure you have addressed all of the requirements of the ISO 9001 standard. Depending upon the size of your business, this can be conducted in a one to two day visit to your facility or virtually via phone. Any discrepancies noted during the Stage 1 audit will be documented in a formal report and must be corrected before the Stage 2 audit. The main part of the ISO audit is the Stage 2 audit which is always conducted onsite at your location(s) and will be focused on the implementation and effectiveness of your QMS. During this audit which can take 1 day (for very small companies) to several days, the auditor(s) will tour your company, speak to managers and employees, and review documentation and records (along with any Stage 1 discrepancies) to ensure that your system is fully implemented. If nonconformances are found, they will be documented in a formal report for correction. Following the Stage 2 audit, you are generally given thirty (30) days to submit corrective action plans for all audit nonconformances. Once corrective actions are received, your certification is complete and your certificate is issued. In order to maintain the certification, you will participate in an annual surveillance audit from your Registrar where they confirm that you are maintaining your QMS. Every third year, a more comprehensive re-certification audit is conducted, similar to the initial certification audit.

ISO 9001 Standard Quality Manual Template

2010-10-27T06:05:00.001-07:00

ISO 9001 Standard Quality Manual Template

The quality manual is the necessary cornerstone for any business venturing out on the ISO 9001:2008 accreditation route as it exhibits top management’s determination to managing an useful quality management system. The quality manual is a type of most essential document which provides the right impression to clients, staff, inspectors and all the parties interested in your company, about your company’s efforts to satisfy all their clientele’s needs. People through your company will relate to it whenever they prefer to find the big picture of the system, or exactly what guidelines have been organized. You can save your valuable time and hard earned money with the quality manual template we offer you. If you really compile the quality manual, you will easily comprehend and apply ISO 9001:2008, which is one of the best methods to do so.By reading by the needs one-by-one and assigning each prerequisite a specific document, process or technique that exists within your company, you will get that over half of the demands have already been resolved. Quality manual makes the relation, between the process and the documents, an official one. Format and content Write your quality manual to ensure that it works for you, for your company and also the manner you work, it is totally your selection however generally make sure that it supports your organisation’s targets. The quality manual should not contain any confidential or proprietary information as it should be readily available to third party auditors and customers. You should also ensure that a clear distinction is made between the contents of the quality manual and the procedures. The quality manual identifies the intention of top management for the operation of the quality management system, whilst the operations explain how these kind of purposes are integrated. There are three things that must be included in the quality manual:

1. The probability of the quality management system such as details of the validation of any exclusions

2. For quality management system, the procedures should be standard or should be mentioned in them

3. A explanation of the discussion between the procedures of the quality management system Who will use your Quality Manual and why?

In general, the clients and the prospective customers need it in order to know how your company system meets their requirements. If your quality manual includes two pages, it may not motivate trust that your system is strong enough to be an useful quality management system. Customers and Clients want assurance that you know how to plan, implement, and control the processes that affect their products or service delivery. The third party inspectors will b interested to know how your company meets their standard needs and also if perhaps the quality management system is useful in accomplishing your organization’s targets. Auditors will use the quality manual as a guide to help out discover and also form the purpose facts that they have to find in exhibition of your company’s compliance with the standard. Internal inspectors can review and inspect their own company for their needs rather than referring to standard documents from external sources. Management ought to be able to determine, from the manual, how the numerous processes and also systems have interaction, and at a high level what policies and methods have been established to maintain and control the processes and systems . The quality manual is usually presented to fresh recruits to familiarize themselves with the organization’s quality management system and also the manuals are often used as an in-house training resource. Most importantly, your quality manual ought to not sit on a dirty shelf or be hidden in an obscure position on the computer network; it is an active and powerful document that requires coverage in order for it to grow and also improve. Please click on the links below to learn more about Quality Manual Templates and view some free examples.

ISO 9000 Standards Document Control System

2010-10-27T06:03:00.002-07:00

ISO 9000 Standards Document Control System
The ISO 9000 Standards requires that a documented procedure be established to define the controls needed.

This requirement means that the methods for performing the various activities required to control different types of documents should be defined and documented.

Although the ISO 9000 standards implies that a single procedure is required, should you choose to produce several different procedures for handling the different types of documents it is doubtful that any auditor would deem this noncompliant. Where this might be questionable is in cases where there is no logical reason for such differences and where merging the procedures and settling on a best practice would improve efficiency and effectiveness.

Documents are recorded information and the purpose of the document control process is to firstly ensure the appropriate information is available where needed and secondly to prevent the inadvertent use of invalid
information. At each stage of the process are activities to be performed that may require documented procedures in order to ensure consistency and predictability. Procedures may not be necessary for each stage in the process.

ISO 9001 Standards – Quality Policy and Objectives

2010-10-27T06:03:00.001-07:00

ISO 9001 Standards – Quality Policy and Objectives

A ISO 9001 Standards quality policy and its corresponding quality objectives are established to direct the organization towards two specific goals of a quality management system:

-Provision of products – goods and services – that meet customer and applicable legal requirements, and

- Enhancement of customer satisfaction

The quality policy and the objectives are also a means of controlling the quality management system’s processes. Simply, if you want to control a process, assign an objective to it (or more) and make sure it is aligned to the quality policy, then monitor and measure the process’ performance against the assigned objective. You need to provide adequate resources to the process to ensure that it is capable of achieving the objective. You continually improve the whole process by upgrading the objective, make corrective and preventive actions or introduce innovation to it. Corrective action addresses an undesirable situation’s cause in order to prevent its recurrence. Preventive action, by contrast, addresses the probable cause of a potentially undesirable situation. This is what the quality policy and objectives are supposed to do. They provide focus, direction and control.

The quality objectives need to be consistent with the quality policy and the commitment to continual improvement, and their achievement needs to be measurable. The achievement of quality objectives can have a positive impact on product quality, operational effectiveness and financial performance and thus on the satisfaction and confidence of interested parties. When an organization has established a quality policy and a set of operational objectives, this means the only thing left to do is to design or plan the necessary processes or tasks that can realize those objectives. Therefore, the processes determine if the objectives will be met in full, partially or not at all. This is where the ISO 9001 standard play a critical role in specifying the required processes and the operating criteria. This is what ISO 9001 is all about. It even specifies criteria for the policy and the objectives.

A quality policy needs to satisfy the following requirements:

It is appropriate to the purpose of the organization,
It includes a commitment to comply with requirements and continually improve the effectiveness of the quality management system,
It provides a framework for establishing and reviewing quality objectives,
It is communicated and understood within the organization, and
It is reviewed for continuing suitability

Quality objectives must be established in order to enable the organization to comply with requirements and continually improve the effectiveness of the quality management system. Quality objectives must achieve four things:

Enable the organization to meet customer requirements
Enable the organization to enhance customer satisfaction
Enable the organization to comply with all legal requirements applicable to the product
Continually contribute to the effectiveness of the quality management system

Therefore, when you are in the meeting room with your management brainstorming on the appropriate objectives, have these four points in mind.

ISO 9001:2000 requires that management periodically review changes to both the policy and objectives. An organization’s objectives must be measurable and its processes designed to meet those objectives. An organization’s overall business goals, quality objectives and quality policy are all interrelated and must work together to achieve business improvement. To do this, it’s necessary to understand which processes are key to achieving business goals and align those processes with the quality objectives. It means aligning business goals, quality objectives and process measures to create real improvement. And it means using process mapping. Process mapping involves more than just flow charting. Among other things, it can manage and improve processes by illustrating process measures as well as process flows and interactions. One process-mapping method begins by involving the people who work in the process. Another entails mapping the process as is, taking action to improve it and then preparing a final map of the improved process.

Process owners are directly responsible for the attainment of the objectives. They must be given adequate resources, including competent human resources. They need to review the objectives periodically to ensure the key performance indicators are heading towards their objectives on schedule. If not, they need to initiate corrective actions and if the risks of non-achievement are visible, take preventive actions to control them and steer the KPI’s back on course.

Examples of quality objectives:

Production rejects <>
Machine breakdown <>
Returned products = 0/mth
Purchasing >95% on-time delivery
Inventory damage = 0/mth

Conclusion: ISO 9001 requires that the quality management system achieves its objectives in order to realize the quality policy.

IMPLEMENTATION OF ISO 9001 STANDARD IN EDUCATION

2010-10-27T06:02:00.001-07:00

IMPLEMENTATION OF ISO 9001 STANDARD IN EDUCATION

international standards pertaining to ISO 9000 (1987) family. The implementation of this last standard grows continuously, either in Europe or in the world. In the period from 2001 to 2003, there was a slight stagnation, which was the consequence of the organisations having to adapt to the requests of ISO 9001:2000 edition of the standard. Croatia also actively participates in this trend, which show that at the end of 2004, organisations were certified, of which 970 of them were from Croatia.

The economy has already met with various endeavours and concepts to build aneffective quality management system. From the historical point of view, the most importantones are Deming Prize (1950), followed by Malcom Baldrige National Award (1987) andinternational standards pertaining to ISO 9000 (1987) family. The implementation of thislast standard grows continuously, either in Europe or in the world, as shown in the picture1. In the period from 2001 to 2003, there was a slight stagnation, which was theconsequence of the organisations having to adapt to the requests of ISO 9001:2008 editionof the standard. Croatia also actively participates in this trend, as illustrated by figures fromthe table 2, which show that at the end of 2004, 670,399 organisations were certified, ofwhich 970 of them were from Croatia.

The implementation of the stated standard in educational activities took a somewhat slower pace. Trends in Croatia do not completely follow the World ones . The 2002 and 2003 stagnation, which, as already mentioned, was mainly caused by transfer from one issue of the standard to the next one, had no particular impact to Croatia, partially because the data for Croatia includes standards from both the previous and the new issue of the ISO 9001 standard.

Best Ways Of Implementing ISO 9001 Standards

2010-08-30T05:29:00.000-07:00

Best Ways Of Implementing ISO 9001 Standards

While each implementation is dependent on the company, the industry, customers, etc., here’s a good starting point:

1.) Identify what your customer expects of your company. Consider both sales and after-sales aspects, from the customer’s point of view.

2.) Develop a philosophy (Quality Policy) that addresses (1). This means clause 5.3.

3.) Identify your processes, keeping in mind the importance of each as compared to (1) above. This means clause 4.1.

4.) Identify your management structure, being sure it supports and does not conflict with (1), (2) or (3). This means the rest of Clause 5 in the standard.

5.) Figure out resource issues. This means all of Clause 6.

7.) From there, work on clauses 7 & 8. This part is particularly hard to define as a generic plan, because how it is done is unique to each company, and the results of (1) through (6) above.

Tips:

(a) Keep documentation to the absolute minimum.

(b) Put “required procedures” and process maps in your Quality Manual, instead of subordinate documents. This makes the QM useful, instead of just a throwaway restatement of the standard. Limits documentation overall.

(d) Develop an internal audit program (process!) that reflects your company needs, not a checklist method used by registrars

10 steps on the implementation of ISO 9001 Standards are as below:

1. Analyze your businesses’ core process(es) for converting customer needs into cash at a high level to show the sequence and interaction of the key processes within the core process (one page).

2. Identify (and assign a code) each of the key processes within your system (as-is) and the new ones necessary for the system to be used to add value faster and prevent loss sooner (the chosen system standard is very helpful for listing the missing processes). Expect 20 to 50 key processes.

3. Analyze each of the key processes by working with the process owner to determine each processes’ objective, team, inputs, value-adding steps (tasks, meetings, decisions), outputs; then link the procedure to the other controls and process with which it interacts (one page each).

4. Leaders explain their policy, the obligations of the system (already 85% or so implemented) and its benefits.

5. Train process teams in any new processes so they are working effectively from day one.

6. Describe the system and how it works, the policy and objectives in a less than 10 page manual.

7. Launch the system and invite lots of suggested improvements.

8. Gather and analyze data to become information for use by decision makers to improve products, processes and the system.

9. Audit the performance of the system independently of any other process control to provide impartial information on how well the system is helping employees to do their jobs.

10. Use and improve the system, its processes and your products so your organization adds value faster and prevent loss sooner.

How To Prepare ISO 9001 Standards Audit Check List

2010-08-30T05:28:00.000-07:00

How To Prepare ISO 9001 Standards Audit Check List

There are a few steps to prepare ISO 9001 Standards Check List, namely:

1. Apply the concept of Plan Do Check Act (PDCA). This PDCA concept is applied at the Quality Management System and the process levels.

2. Convert the question to requirement raised by QMR or the QMS Committee which derived from theISO 9001 standards. In this case, several questions can lead to one single requirement.

3. To edit those questions to suit the process that is to be audited. For example, you are going to audit the Purchasing/Procurement Department and you’re sitting down with the Audit Team trying to come up with relevant questions.

The main objective in auditing any process is to extract adequate information and evidence in order to verify that the process is conformant to the ISO 9001 requirements and that, it is effective in achieving its objectives. As an auditor, you need to be able to investigate, assess and verify the conformity and effectiveness of a given process, in terms of its planning, implementation, monitoring & measurement and improvement. As a Lead Auditor, preparing your Audit Team for the actual audit is crucial in ensuring success of the audit excercise. There is no better way to do that than by developing the audit questions with them.

Audit Of Electronic Documents In ISO 9001 Standards

2010-08-30T05:27:00.000-07:00

Audit Of Electronic Documents In ISO 9001 Standards

Electronic documents that establish management system policies and procedures can be in a variety of file formats depending on the software applications that are utilized by the organization to generate the documents. Electronic file formats include, Text, HTML, PDF, etc. Spreadsheets and databases formats are also considered to be electronic “documents” subject to the control elements of the management system to being audited.

Given the relative ease with which users can now create electronic spreadsheets and other electronic documents, auditors (either internal or external) should ensure that policies governing the controls that apply to management system documentation in-general are also employed for electronic documents through appropriate procedures.

Organizations need to employ suitable and effective methods within the electronic environment for ensuring the adequate review, approval, publication and distribution of its management system documentation. These should be consistent with the methods for the development and modification of electronic documents.

In many cases document control measures may also be standard features of software applications used for their creation. Therefore auditors should understand these application-specific controls to the degree that these are utilized as a basis for conformance to the applicable management system standard.

Given the increased capacity to modify, update, reformat and otherwise improve documents within an electronic-based management system, auditors should pay particular attention to control elements such as document identification and document revision level.

As electronic media facilitates an increased rate of document modifications, auditors should verify that the controls being employed for the management of obsolete documents are considered within the organizations’ document control policies and procedures.

Auditors should verify that electronic-based documentation exists to provide orientation to users with regard to the functional and control aspects associated with electronic documents. Additionally, “Point-of-use” requirements associated with the applicable management system standards will typically be addressed in part by the organization’s document access policies. Auditors should understand the organization’s policies and procedures regarding user privileges as these become important factors for properly realizing the organization’s processes.

External electronic communication with suppliers, customers and other interested parties may involve the exchange of documents. Given that these external documents may contain key parameters that specify the functioning of the organization’s processes, auditors should verify the degree to which these documents are formally introduced and controlled within the electronic-based management system.

ISO 9001 Standards & ISO 14001 Standards

2010-08-30T05:26:00.000-07:00

In order to assist organizations to have a full understanding of the new ISO 9001:2008, it may be useful to have an insight on the revision process, how this revision reflects the inputs received from users of the standard, and the consideration given to benefits and impacts during its development.

Prior to the commencement of a revision (or amendment) to a management system standard, ISO/Guide 72:2001 Guidelines for the justification and development of management system standards recommends that a “Justification Study” is prepared to present a case for the proposed project and that it outlines details of the data and inputs used to support its arguments. In relation to the development ofISO 9001:2008 user needs were identified from the following:

-the results of a formal “Systematic Review” on ISO 9001:2000 that was performed by the members of ISO/TC 176/SC2 during 2003-2004
-feedback from the ISO/TC 176/Working Group on “Interpretations”
-the results of an extensive worldwide “User Feedback Survey on ISO 9001 and
The Justification Study identified the need for an amendment, provided that the impact on users would be limited and that changes would only be introduced when there were clear benefits to users.

The key focuses of the ISO 9001:2008 amendment were to enhance the clarity of ISO 9001:2000 and to enhance its compatibility with ISO 14001:2004.

A tool for assessing the impacts versus benefits for proposed changes was created to assist the drafters of the amendment in deciding which changes should be included, and to assist in the verification of drafts against the identified user needs. The following decision making principles were applied:

1) No changes with high impact would be incorporated into the standard;

2) Changes with medium impact would only be incorporated when they provided a correspondingly medium or high benefit to users of the standard;

3) Even where a change was low impact, it had to be justified by the benefits it delivered to users, before being incorporated.

The changes incorporated in this ISO 9001:2008 edition were classified in terms of impact into the following categories:

-No changes or minimum changes on user documents, including records

-No changes or minimum changes to existing processes of the organization

-No additional training required or minimal training required

-No effects on current certifications

The benefits identified for the ISO 9001:2008 edition fall into the following categories:

-Provides clarity

-Increases compatibility with ISO 14001.

-Maintains consistency with ISO 9000 family of standards.

-Improves translatability.

FAQs On ISO 9001 Standards

2010-06-18T05:41:00.000-07:00

This list of Frequently Asked Questions (FAQs) has been prepared by ISO/TC 176/SC 2 to support the publication of ISO 9001:2008 and the revision of ISO 9004. Input has been obtained from experts and users of the ISO 9000 standards, expressed during seminars and presentations around the world.
The list will be reviewed and updated on a regular basis to maintain its accuracy, and to include new questions where appropriate. It is intended that this list will also provide a good source of information for new users of the standards.

ISO 9001 Standards Certification

2010-06-18T05:38:00.000-07:00

When an organization chooses not to pursue ISO 9001 certification or not to retain the ISO 9001 certificate, it should make no difference to the way the organization is managed. Its similar to the man who chooses not to take the course examination. He still has the knowledge he has acquired whether or not he takes the exam and gets a certificate. What he cannot do is demonstrate to others that he has reached a certain level of education without having to prove it every time. People who know him dont care that he didnt take the exam. It is only those who dont know him that he will have difficulty convincing.

Many organizations were driven to seek ISO 9001 certification by pressure from customers rather than as an incentive to improve business performance and therefore sought the quickest route to certification. The critics called this coercion and like most command and control strategies, believed it resulted in managers cheating just to get the badge. What was out of character was that suppliers that were well known to customers were made to jump through this hoop in order to get a tick in a box in a list of approved suppliers. It became a necessary evil to do business. Certainly when perceived as a means to get a badge, the standard was no more than a marketing tool. It could have been used as a framework for improvement but the way it was imposed on organizations generated fear brought about by ignorant customers who mistakenly believed that imposing ISO 9001 would improve quality. To achieve anything in our society we inevitably have to impose rules and regulations what the critics regard as command and control but unfortunately, any progress we make masks the disadvantages of this strategy and because we only do what we are required to do, few people learn. When people make errors more rules are imposed until we are put in a straightjacket and productivity plummets. There is a need for regulations to keep sharks out of the bathing area, but if the regulations prevent bathing we defeat the objective, as did many of the customers that imposed ISO 9001.

What’s the difference between ISO 9001 and CMM?

2010-04-08T08:12:00.000-07:00

Understanding the difference between ISO 9001 Standards and CMM means recognising a cultural understanding of quality. -Microsoft and many other software companies govern quality with the 80-20 rule,” said David Smith, vice president of Technology Futures, a technology forecasting company in Austin, TX. -The rationale is, ‘it’s a real product if 80 percent of the problem can be addressed and the remaining 20 percent is part of the business model.’ But the reality is the software industry’s business model is not a business model of total quality. And that is part of the challenge when you compare a CMM model against an ISO 9001 Standards model.”

The problem, as Smith sees it, is a conflict between the approaches to quality of ISO 9000 Standards and CMM programs, on the one hand, and the business model that corporations use on the other. -When you’re developing a product, the hardest problems to fix are the last 20 percent,” noted Smith.

Smith highlights three critical elements for understanding ISO 9001 and CMM:

Understanding and documenting the true requirements is a key element in both standards.
Document how you write the software code so other people can understand its value.
Understand the requirements outlined in the program management and business models. It means understanding the maximum payback from the ISO and CMM levels. This is difficult to achieve because it requires both management and supervisory hats.

Software in the original description of ISO 9001 is different from software that runs on a computer, explains Mark Paulk, a senior member of the technical staff at Carnegie Mellon’s SEI.

Paulk’s advice: Understand the essence of ISO 9001 so you can compare it to CMM. ISO 9001’s definition of software is more general and includes music, entertainment, or anything involving the creation of an intangible product.

-But the original bias of the standard was strongly toward the manufacturing environment, where all the historical work had been done,” said Paulk. -And that is one of the criticisms of the early releases of the standards. One of the objectives of the ISO 9000 revisions was it failed to make the standard more comfortable to users in other environments.”

ISO 9000 Total Quality Management

2010-02-24T01:38:00.000-08:00

TQM is infinitely variable and adaptable. Although originally applied to manufacturing operations, and for a number of years only used in that area, TQM is now becoming recognised as a generic management tool, just as applicable in service and public sector organisations. There are a number of evolutionary strands, with different sectors creating their own versions from
the common ancestor.

ISO 9000 Standards Training DVD

2010-02-04T07:35:00.000-08:00

ISO 9000 Standards Training DVD
The major reasons that company leadership or management decides to seek ISO 9000 certification are to gain continued or increased business and to maintain effective operations.

A company can maintain a relationship with customers, as well as get increased business through complying to the ISO 900 standards or becoming certified. This comes from satisfying customer demands, the desire for European business, and to advertise.

The Introduction to ISO 9001:2008 DVD covers 3 major areas, which will help companies in the process of implementing ISO 9000 Standards. It consists of:

First, to describe some basic information on ISO 9000 Standards. It will specifically refer to ISO 9001:2008 Standards. The video will explained on topic like what is ISO 9000 Standards, The origin, history & evolution, Series of ISO 9000, version & certification in ISO 9000 Standards.

Then, the DVD will go into the introduction on quality management. It will explained on topics like what is quality, quality characteristic, quality management, Quality Management Principles, ISO 9000 vs. Quality, what is Quality Management System & etc.

Finally, the DVD will technically highlight the requirement of Quality Management System in ISO 9001:2008. It also going through in details the steps in implementing Quality Management System in ISO 9001:2008.

Document Review In ISO 9001 Standards

2010-01-16T17:22:00.000-08:00

Document Review In ISO 9001 Standards

The ISO 9001 Standard requires that documents be reviewed.
Previously the implication was that the review was a check by potential users that the document was fit for purpose before it was offered for approval. It
could be construed that for a document to receive approval it must be checked and therefore review and approval in this context are one and the same and the requirement is in this instance enhanced rather than relaxed.
A review is another look at something. Therefore document review is a task that is carried out at any time following the issue of a document.
This requirement responds to the Continual Improvement principle.
Reviews may be necessary when:
- Taking remedial action (i.e. Correcting an error)
- Taking corrective action (i.e. Preventing an error recurring)
- Taking preventive action (i.e. Preventing the occurrence of an error)
- Taking maintenance action (i.e. Keeping information current)
- Validating a document for use (i.e. When selecting documents for use in
connection with a project, product, contract or other application)
- Taking improvement action (i.e. Making beneficial change to the
information)
Reviews may be random or periodic. Random reviews are reactive and arise
from an error or a change that is either planned or unplanned. Periodic reviews
are proactive and could be scheduled once each year to review the policies,
processes, products, procedures, specification etc. for continued suitability. In
this way obsolete documents are culled from the system. However, if the
system is being properly maintained there should be no outdated information
available in the user domain. Whenever a new process or a modified process
in installed the redundant elements including documentation and equipment
should be disposed of.

Assessment to ISO 9000 Standards

2010-01-16T17:20:00.000-08:00

Assessment to ISO 9001 Standards
Once all the requirements of ISO 9001 have been met, it is time for an external audit. This should be carried out by a third party, accredited certification body. In the UK, the body should be accredited by UKAS. The chosen certification body will review the quality manuals and procedures. This process involves looking at the companys evaluation of quality and ascertains if targets set for the management program are measurable and achievable. This is followed at a later date by a full on-site audit to ensure that working practices observe the procedures and stated objectives and that appropriate records are kept.
After a successful audit, a certificate of registration to ISO 9001 will be issued. There will then be surveillance visits (usually once or twice a year) to ensure that the system continues to work.

Preparing The ISO 9000 Standards Quality Manual

2009-12-26T04:28:00.000-08:00

Preparing The ISO 9000 Standards Quality Manual

ISO 9000 Standards – Quality Management Principles

2009-11-26T06:37:00.001-08:00

ISO 9000 Standards – Quality Management Principles
A quality management principle is defined by ISO/TC 176 as a comprehensive and fundamental rule or belief, for leading and operating an organization, aimed at continually improving performance over the long term by focusing on customers while addressing the needs of all other interested parties. Eight principles have emerged as fundamental to the management of quality.

All the requirements of ISO 9001:2008 are related to one or more of these principles. These principles provide the reasons for the requirements and are thus very important. The quality management principles can be listed as below:

1. Customer focus
Organizations depend on their customers and therefore should understand current and future customer needs, meet customer requirements and strive to exceed customer expectations.
The customer focus principle is reflected in ISO 9000 Standards through the requirements addressing:
a. Communication with the customer
b. Care for customer property
c. The determination of customer needs and expectations
d. Appointment of a management representative
e. Management commitment

2. Leadership
Leaders establish unity of purpose and direction for the organization. They should create and maintain the internal environment in which people can become fully involved in achieving the organization’s objectives.
The leadership principle is reflected in ISO 9000 Standards through the requirements addressing:
a. The setting of objectives and policies
b. Planning
c. Internal communication
d. Creating an effective work environment

3. Involvement of people
People at all levels are the essence of an organization and their full involvement enables their abilities to be used for the organization’s benefit.
The involvement of people principle is reflected in ISO 9000 Standards through the requirements addressing:
a. Participation in design reviews
b. Defining objectives, responsibilities and authority
c. Creating an environment in which people are motivated
d. Internal communication
e. Identifying competence needs

4. Process approach
A desired result is achieved more efficiently when related resources and activities are managed as a process.
The process approach principle is reflected in ISO 9000 Standards through the requirements addressing:
a. The identity of processes
b. Defining process inputs and outputs
c. Providing the infrastructure, information and resources for processes to
function

5. System approach to management
This principle is expressed as follows:
Identifying, understanding and managing interrelated processes as a system contributes to the organization’s effectiveness and efficiency in achieving its objectives.
The system approach principle is reflected in ISO 9001 through the requirements addressing:
a. Establishing, implementing and maintaining the management system
b. Interconnection, interrelation and sequence of processes
c. The links between processes
d. Establishing measurement processes

6. Continual improvement
This principle is expressed as follows:
Continual improvement of the organization’s overall performance should be a permanent objective of the organization.
The continual improvement principle is reflected in ISO 9000 Standards through the requirements addressing:
a. Improvement processes
b. Identifying improvements
c. Reviewing documents and processes for opportunities for improvement

7. Factual approach to decision making
This principle is expressed as follows:
Effective decisions are based on the analysis of data and information.
The factual approach principle is reflected in ISO 9000 Standards through the requirements addressing:
a. Reviews, measurements and monitoring to obtain facts
b. Control of measuring devices
c. Analysis to obtain facts from information
d. Records for documenting the facts
e. Approvals based on facts

8. Mutually beneficial supplier relationships
This principle is expressed as follows:
An organization and its suppliers are interdependent and a mutually beneficial relationship enhances the ability of both to create value.
The mutually beneficial supplier relationships principle is reflected in ISO 9000 Standardsthrough the requirements addressing:
a. Control of suppliers
b. Evaluation of suppliers
c. Analysis and review of supplier data

ISO 9000 Standards – Retention Of Records

2009-11-26T06:36:00.002-08:00

ISO 9000 Standards – Retention Of Records
It is important that records are not destroyed before their useful life is over.
There are several factors to consider when determining the retention time for records.
The duration of the contract – some records are only of value whilst the contract is in force.
The life of the product – access to the records will probably not be needed for some considerable time, possibly long after the contract has closed. On defence contracts the contractor has to keep records for up to 20 years and
for product liability purposes, in the worst-case situation (taking account of
appeals) you could be asked to produce records up to 17 years after you made the product.
The period between management system assessments – assessors may wish to see evidence that corrective actions from the last assessment were taken. If the period of assessment is three years and you dispose of the evidence after 2 years, you will have some difficulty in convincing the assessor that you corrected the deficiency.
You will also need to take account of the subcontractor records and ensure
adequate retention times are invoked in the contract.
Where the retention time is actually specified can present a problem. If you
specify it in a general procedure you are likely to want to prescribe a single
figure, say 5 years for all records. However, this may cause storage problems – it may be more appropriate therefore to specify the retention times in the procedures that describe the records. In this way you can be selective.
You will also need a means of determining when the retention time has
expired so that if necessary you can dispose of the records. The retention time doesn’t mean that you must dispose of them when the time expires – only that you must retain the records for at least that stated period. Not only will the records need to be dated but the files that contain the records need to be dated and if stored in an archive, the shelves or drawers also dated. It is for this reason that all documents should carry a date of origin and this requirement needs to be specified in the procedures that describe the records. If you can rely on the selection process a simple method is to store the records in bins or computer disks that carry the date of disposal.
While the ISO 9000 requirement applies only to records, you may also need to retain tools, jigs, fixtures, test software – in fact anything that is needed to repair or reproduce equipment in order to honour your long-term commitments.
Should the customer specify a retention period greater than what you
prescribe in your procedures, special provisions will need to be made and this is a potential area of risk. Customers may choose not to specify a particular time and require you to seek approval before destruction. Any contract that requires you to do something different creates a problem in conveying the requirements to those who are to implement them. The simple solution is to persuade your customer to accept your policy. You may not want to change your procedures for one contract. If you can’t change the contract, the only alternative is to issue special instructions. You may be better off storing the records in a special contract store away from the normal store or alternatively attach special labels to the files to alert the people looking after the archives.

comments

ISO 9000 Standards – Document Approval

2009-11-26T06:36:00.001-08:00

ISO 9000 Standards – Document Approval
The ISO 9000 Standards requires that documents be approved for adequacy prior to issue.

Approval prior to issue means that designated authorities have agreed the document before being made available for use. Whilst the term ade-
quacy is a little vague it should be taken as meaning that the document is judged as fit for the intended purpose. In a paper based system, this means approval before the document is distributed. With an electronic system, it means that the documents should be approved before they are published or made available to the user community.

The ISO 9000 Standards document control process needs to define the process by which documents are approved. In some cases it may not be necessary for anyone other than the approval authority to examine the documents. In others it may be necessary to set up a panel of reviewers to solicit their comments before approval is given.
It all depends on whether the approval authority has all the information
needed to make the decision and is therefore ‘competent’. One might think that the CEO could approve any document in the organization but just because a person is the most senior executive does not mean he or she is competent to perform any role in the organization.

Users should be the prime participants in the approval process so that the
resultant documents reflect their needs and are fit for the intended purpose. If the objective is stated in the document, does it fulfil that objective? If it is stated that the document applies to certain equipment, area or activity, does it cover that equipment, area or activity to the depth expected of such a document? One of the difficulties in soliciting comments to documents is that you will gather comment on what you have written but not on what you have omitted. A useful method is to ensure that the procedures requiring the document specify the acceptance criteria so that the reviewers and approvers can check the document against an agreed standard.

To demonstrate documents have been deemed as adequate prior to issue,
you will need to show that the document has been processed through the
prescribed document approval process. Where there is a review panel, a simple method is to employ a standard comment sheet on which reviewers can indicate their comments or signify that they have no comment. During the drafting process you may undertake several revisions. You may feel it
necessary to retain these in case of dispute later, but you are not required to do so. You also need to show that the current issue has been reviewed so your comment sheets need to indicate document issue status.

ISO 9001 Standards – Design and Development

2009-11-22T01:09:00.001-08:00

ISO 9001 Standards - Design and Development

Plan and control the product design and development. This planning must determine the:Identify problems and propose any necessary actions

- Stages of design and development

- Appropriate review, verification, and validation activities for each stage

- Responsibility and authority for design and development

The interfaces between the different involved groups must be managed to ensure effective communication and the clear assignment of responsibility. Update, as appropriate, the planning output during design and development.

NOTE: Design and development review, verification, and validation have distinct purposes. They can be conducted and recorded separately or in any combination, as deemed suitable for the product and the organization.

Determine product requirement inputs and maintain records. The inputs must include:

- Functional and performance requirements

- Applicable statutory and regulatory requirements

- Applicable information derived from similar designs

- Requirements essential for design and development

Review these inputs for adequacy. Resolve any incomplete, ambiguous, or conflicting requirements.

Document the outputs of the design and development process in a form suitable for verification against the inputs to the process. The outputs must:

- Meet design and development input requirements

- Provide information for purchasing, production, and service

- Contain or reference product acceptance criteria

- Define essential characteristics for safe and proper use

- Be approved before their release

Perform systematic reviews of design and development at suitable stages in accordance with planned arrangements to:

- Evaluate the ability of the results to meet requirements

- The reviews must include representatives of the functions concerned with the stage being reviewed. Maintain the results of reviews and subsequent follow-up actions.

ISO 9001 Standards – Control of Measuring and Monitoring Equipment

2009-11-22T01:07:00.000-08:00

ISO 9001 Standards - Control of Measuring and Monitoring Equipment

Determine the monitoring and measurements to be made, and the required equipment, to provide evidence of product conformity. Use and control the monitoring and measuring devices to ensure that measurement capability is consistent with monitoring and measurement requirements.

Where necessary to ensure valid results:

- Calibrate and/or verify the measuring equipment at specified intervals or prior to use

- Calibrate the equipment to national or international standards (or record other basis)

- Adjust or re-adjust as necessary

- Identify the measuring equipment in order to determine its calibration status

- Safeguard them from improper adjustments

- Protect them from damage and deterioration

Assess and record the validity of prior results if the device is found to not conform to requirements. Maintain records of the calibration and verification results.

Confirm the ability of software used for monitoring and measuring for the intended application before its initial use (and reconfirmed as necessary).

NOTE: Confirming the ability of software to satisfy the intended application would typically include its verification and configuration management to maintain its suitability for use.

For More Information Please Visit http://www.iso9001-standard.us

How To Implement ISO 9001 Standards Using Template & Softwares

2009-10-08T03:38:00.000-07:00

There are few ways of implementing the ISO 9000 in a particular organization. One of the easy way is hiring a ISO 9000 consultant in a turn key project basis. This definitely will incur cost. However, some of the organization will appoiint an employee to start up the ISO 9000, by learning thru seminar, preparing the ISO 9000 Quality Manual, Procedure & Form by using some of the ISO 9000 Template sell at internet. Some of the provider such as http://www.iso-consults.com & http://www.quality-template.com are providing such services.
Normally, the template provide will provides the ISO 9000 Quality Manual Template, Standand Procedure & also sample form for the ISO 9000 implementation. One of the provider like http://www.e-wia.com give a very complete set of the ISO 9000 Templates, which will help an organization to implement the ISO 9000 easily.
There are also some ISO 9000 Softwares which helps the organization in the ISO 9000 implementation. Some of the ISO 9000 Software are listed below:
a. Document Control Software – Software which Helps the organization to keep track & control of the ISO 9000 Documents.
b. Audit Control Software – Software which helps the organization to keep track of internal & external audit events.
c. Training Record Management Software – Software which helps the organization to keep track of Training records in a system.
d. Calibration Software – Software to maintain the calibration records for tool & machinery.
More Sites on ISO 9001 Standards Template & Softwares are as below:
http://www.iso9001store.com
http://www.iso14000store.com

ISO 9000 Standard Books & Magazines

2009-10-02T15:33:00.001-07:00

Here are some of the ISO 9000 & ISO 14001 related books & magazines available for online order.
1. ISO Management Systems – English Edition (Magazine Subscription) by Amazon
Format: Magazine
Shipping: Currently, item can be shipped only within the U.S.
Publisher: Iso Central Secretariat
ASIN: B00006KJFO
Iso Focus C-W Iso Management Systems – English ed
2. ISO Focus (Magazine Subscription) by Amazon
Magazine of the International Organization for Standardization providing a panoramic view of what is being done in international standardization, why it has been done and what will be done.
Format: Magazine
Shipping: Currently, item can be shipped only within the U.S.
Publisher: Iso Central Secretariat
ASIN: B0001MS4E6
Iso Focus
3. ISO 9000 Quarterly Report (Magazine Subscription) by Amazon
Format: Magazine
Shipping: Currently, item can be shipped only within the U.S.
Publisher: Rfp Report
ASIN: B00007J7K4
Iso 9000 Quarterly Report
4. A Basic Guide To ISO 14000 – Environment Management System (EMS) provides you with all of the basic information you need in ISO 14000 and ISO 14001:2004.
What is ISO14000
Benefits of ISO 14000
History of ISO 14000
ISO 14000 Certification
ISO 14000 Process Check List
Contents Of ISO 14001:2004
Key Elements Of ISO 14001:2004
Environment Management System Manual
AND MUCH, MUCH MORE!

ISO 9001 Software

2009-10-02T15:32:00.003-07:00

Companies that need quality management systems realize that products like ISO 9001 software are important tools to insure their product safety, consistency and profitability. Using ISO 9001 software can help guarantee that any company can monitor productivity, customer satisfaction and product quality with reports that contain solid information.
This information is now vital to management in order for maximum efficiency in any industry. This is why ISO 9001 software is vital to any sized company. Continuous improvement means continuous profitability. Here are just a few reasons why:
o Companies increase sales because of better performance, quality, and delivery. This propels you ahead of your competition.
o ISO 9001 software helps retain employees and attract more highly qualified employees because they are assured of a controlled and consistent work environment.
o The experience of a more professional workplace boosts employee morale.
o Reduced operating costs dramatically increase your company’s productivity, leading to higher profitability.
o Customer satisfaction and higher profitability expand your market share and demand for your consistently higher product quality.
o When you’re compliant or certified to the appropriate standard, the businesses that work with you know that quality objectives, continuous improvement, and customer satisfaction are your goals.
Many companies require that their suppliers are ISO 9001 compliant; therefore, once you’re certified, your opportunities increase. ISO 9001 software has be utilized and has developed experience of helping manufacturing, service, and distribution organizations to be more efficient and more profitable through continuous improvement programs. We help you to implement the time-tested methods of continuous improvement to measure performance, analyze data, and apply the appropriate process changes. This includes using ISO 9001 software.
ISO 9001 software also offers a suite of modules to enable you to manage the document management and ISO 9001 Compliance Management process. These modules enable complete transparent system measurement with targeted action items ensuring all persons are notified of tasks and carry them out in a prompt and efficient manner. ISO 9001 software provides training in there software and also bring extensive experience in implementing the ISO 9001 software in various environments.

ISO 9001 Software

2009-10-02T15:32:00.001-07:00

Document and Data Control in ISO 9000 & ISO 14001

2009-10-02T15:30:00.000-07:00

The organization shall establish and maintain procedures for controlling all documents and data required by ISO 9000 & ISO 14001
a) they can be located;
b) they are periodically reviewed, revised as necessary, and approved for adequacy by authorized personnel;
c) current versions of relevant documents and data are available at all locations where operations essential to the effective functioning of the OH&S system are performed;
d) obsolete documents and data are promptly removed from all points of issue and points of use, or otherwise assured against unintended use;
e) archival documents and data retained for legal or knowledge preservation purposes, are suitably identified.
Accidents, incidents, non-conformances and corrective and preventive action
The organization shall implement and record any changes in the documented procedures resulting from corrective and preventive action.
Documents required by the ISO 9000 & ISO 14001 shall be controlled. Records are a special type of document and shall be controlled in accordance with the requirements.
The organization shall establish, implement and maintain procedure[s] to:
a) approve documents for adequacy prior to use;
b) review and update as necessary and re-approve documents;
c) ensure that changes and the current revisions status of documents are identified;
d.) ensure that relevant versions of applicable documents are available at points of use;
e.) ensure that documents remain legible and readily identifiable;
f.) ensure that documents of external origin determined by the organization to be necessary for the planning and operation of the ISO 9000 & ISO 14001 management system are identified and their distribution controlled, and
g.) prevent the unintended use of obsolete documents and apply suitable identification to them if they are retained for any purpose.

ISO 9001:2008 Documentation Requirements

2009-09-29T02:32:00.000-07:00

ISO 9001:2008 Documentation Requirements
ISO 9001:2008 clause 4.1 General requirements requires an organization to “establish, document, implement, and maintain a quality management system and continually improve its effectiveness in accordance with the requirements of this International Standard”
Clause 4.2.1 General explains that the quality management system documentation shall include:
documented statements of a quality policy and quality objectives;
a quality manual documented procedures required by this International Standard documents needed by the organization to ensure the effective planning, operation and control of its processes, and records required by this International Standard;
The notes after Clause 4.2 make it clear that where the standard specifically requires a “documented procedure”, the procedure has to be established, documented, implemented and maintained. It also emphasizes that the extent of the QMS documentation may differ from one organization to another due to:
the size of organization and type of activities;
the complexity of processes and their interactions, and
the competence of personnel.
All the documents that form part of the QMS have to be controlled in accordance with clause 4.2.3 of ISO 9001:2008, or, for the particular case of records, according to clause 4.2.4.
Comments (0)
Guidance on Clause 4.2 of ISO 9001:2008
Posted by everise iso 9001 standard Monday 28 September 2009 8:51 am Edit This
Guidance on Clause 4.2 of ISO 9001:2008
The following comments are intended to assist users of ISO 9001:2008 in understanding the intent of the general documentation requirements of the International Standard.
a) Documented statements of a quality policy and objectives:
Requirements for the quality policy are defined in clause 5.3 of ISO 9001:2008. The documented quality policy has to be controlled according to the requirements of clause 4.2.3.
Note: Organizations that are revising their quality policy for the first time, or in order to meet the amended requirements in ISO 9001:2008, should pay particular attention to clause 4.2.3 (c), (d) and (g).
Requirements for quality objectives are defined in clause 5.4.1 of ISO 9001:2008. These documented quality objectives are also subject to the document control requirements of clause 4.2.3.
b) Quality Manual:
Clause 4.2.2 of ISO 9001:2008 specifies the minimum content for a quality manual. The format and structure of the manual is a decision for each organization, and will depend on the organization’s size, culture and complexity. Some organizations may choose to use the quality manual for other purposes besides that of simply documenting the QMS
A small organization may find it appropriate to include the description of its entire QMS within a single manual, including all the documented procedures required by the standard.
Large, multi-national organizations may need several manuals at the global, national or regional level, and a more complex hierarchy of documentation.
The quality manual is a document that has to be controlled in accordance with the requirements of clause 4.2.3.
c) Documented procedures:
ISO 9001:2008 specifically requires the organization to have “documented procedures” for the following six activities:
4.2.3 Control of documents
4.2.4 Control of records
8.2.2 Internal audit
8.3 Control of nonconforming product
8.5.2 Corrective action
8.5.3 Preventive action
These documented procedures have to be controlled in accordance with the requirements of clause 4.2.3 Some organizations may find it convenient to combine the procedure for several activities into a single documented procedure (for example, corrective action and preventive action). Others may choose to document a given activity by using more than one documented procedure (for example, internal audits). Both are acceptable.
Some organizations (particularly larger organizations, or those with more complex processes) may require additional documented procedures (particularly those relating to product realization processes) to implement an effective QMS.
Other organizations may require additional procedures, but the size and/or culture of the organization could enable these to be effectively implemented without necessarily being documented. However, in order to demonstrate compliance with ISO 9001:2008, the organization has to be able to provide objective evidence (not necessarily documented) that its QMS has been effectively implemented.
d) Documents needed by the organization to ensure the effective planning, operation and control of its processes:
In order for an organization to demonstrate the effective implementation of its QMS, it may be necessary to develop documents other than documented procedures. However, the only documents specifically mentioned in ISO 9001:2008 are:
- Quality policy (clause 4.2.1.a)
- Quality objectives (clause 4.2.1.a)
- Quality manual (clause 4.2.1.b)
There are several requirements of ISO 9001:2008 where an organization could add value to its QMS and demonstrate conformity by the preparation of other documents, even though the standard does not specifically require them. Examples
may include:
- Process maps, process flow charts and/or process descriptions
- Organization charts
- Specifications
- Work and/or test instructions
- Documents containing internal communications
- Production schedules
- Approved supplier lists
- Test and inspection plans
- Quality plans
All such documents have to be controlled in accordance with the requirements of clause 4.2.3 and/or 4.2.4, as applicable
e) Records:
Examples of records specifically required by ISO 9001:2008 are presented in Annex B.
Organizations are free to develop other records that may be needed to demonstrate conformity of their processes, products and quality management system.
Requirements for the control of records are different from those for other documents, and all records have to be controlled according to those of clause 4.2.4 of ISO 9001:2008.
Comments (0)
Demonstrating conformity with ISO 9001:2008
Posted by everise iso 9001 standard Monday 28 September 2009 8:40 am Edit This
Demonstrating conformity with ISO 9001:2008
For organizations wishing to demonstrate conformity with the requirements of ISO 9001:2008, for the purposes of certification/registration, contractual, or other reasons, it is important to remember the need to provide evidence of the effective implementation of the QMS.
Organizations may be able to demonstrate conformity without the need for extensive documentation.
To claim conformity with ISO 9001:2008, the organization has to be able to provide objective evidence of the effectiveness of its processes and its quality management system. Clause 3.8.1 of ISO 9000:2005 defines “objective
evidence” as “data supporting the existence or variety of something” and notes that “objective evidence may be obtained through observation, measurement, test, or other means.”
Objective evidence does not necessarily depend on the existence of documented procedures, records or other documents, except where specifically mentioned in ISO 9001:2008. In some cases, (for example, in clause 7.1(d)
Planning of product realization, and clause 8.2.4 Monitoring and measurement of product), it is up to the organization to determine what records are necessary in order to provide this objective evidence.
Where the organization has no specific internal procedure for a particular activity, and this is not required by the standard, (for example, clause 5.6 Management Review), it is acceptable for this activity to be conducted using as a basis the relevant clause of ISO 9001:2008. In these situations, both internal and external audits may use the text of ISO 9001:2008 for conformity assessment purposes.

ISO 9001 & ISO 14001 Blog

2009-09-22T05:51:00.000-07:00

Some of the new blogs on ISO 9001 Standards & ISO 14001 standards was found as below:
http://iso14000standards.blogspot.com/
http://iso-9001-standards.blogspot.com/
http://iso14001environmentmanagementsystem.blogspot.com/
http://iso9001qualitymanagementsystem.blogspot.com/
http://iso9001qualitymanual.blogspot.com/
http://iso9000standards.blogspot.com/
http://iso9001-standards.blogspot.com/
http://iso14001standards.blogspot.com/
http://www.iso14000store.com/blog
http://www.iso9001-standard.us

Certification In ISO 9001 Standards

2009-09-15T01:45:00.000-07:00

Certification In ISO 9001 Standards
Certification involves an independent assessment of your quality system to confirm that it meets the requirements of ISO 9001. You will need to design, document and implement your own quality system. The system will need to cover all the requirements of the ISO 9001 standard. Many certification bodies will not conduct a formal assessment until the system has been operating for at least three months. Your quality system cannot be audited until you have generated documentary evidence to show that you are meeting the standard. To find a certification body with relevant experience in your sector and accreditation from the United Kingdom Accreditation Service (UKAS). Certification by a non-UKAS accredited body is likely to lead to credibility problems with your customers. Arrange a visit from the certification body’s auditors. UKAS prohibits auditors from acting as consultants. They will not tell you how to meet the standard but can offer advice. They will seek objective evidence that you are complying with each of the clauses of the ISO 9001 standard. The auditors will tell you of any shortcomings in your system. If you satisfy the standard, the auditors put your name forward for certification. You will be required to correct these problems within a specified timeframe. You can also be certificated if the auditors only identify a small number of ‘minor’ problems. Once you are certificated, you can display the certification body’s logo, and if the body is UKAS-accredited, the UKAS ‘tick and crown’ symbol (consult UKAS about exceptions to this rule). If the auditors identify more serious ‘major’ problems, you will be required to correct these before certification.

ISO 14001:2004 Standards Contents

2009-09-15T01:39:00.000-07:00

ISO 14001:2004 Standards
ISO 14000 is a series of international standards on environmental management. It provides a framework for the development of an environmental management system and the supporting audit programme.
The main thrust for its development came as a result of the Rio Summit on the Environment held in 1992.
ISO 14000 is an Environmental Management System (EMS), which requires that an organization consider the environmental aspects of its products and services.
Iso14000 approach forces you to take a hard look at all areas of your business that has an environmental impact.
Iso14000 is the world’s first series of Internationally accepted Standards for Environmental Management Systems (EMS).
Iso14000 elevates Environmental Management to a Strategic Level that can be applied to any organization, from any industry, anywhere in the world.
ISO 14000 is a series of voluntary standards and guideline reference documents.
The part of the overall management system that includes organizational structure, planning activities, responsibilities, practices, procedures, processes and resources for developing, implementing, achieving, reviewing and maintaining the environmental policy.
Iso14000 is the world’s first series of Internationally accepted Standards for Environmental Management Systems (EMS).
Iso14000 elevates Environmental Management to a Strategic Level that can be applied to any organization, from any industry, anywhere in the world.
ISO 14000 is a series of voluntary standards and guideline reference documents.
The part of the overall management system that includes organizational structure, planning activities, responsibilities, practices, procedures, processes and resources for developing, implementing, achieving, reviewing and maintaining the environmental policy.
ISO 14000 is an Environmental Management System (EMS) who’s purpose is:
· A management commitment to pollution prevention.
· An understanding of the environmental impacts (reducing) of an organization’s activities.
A commitment (pollution prevention) to employees, neighbors and customers
ISO 14001 is the corner stone standard of the ISO 14000 series. It specifies a framework of control for an Environmental Management System against which an organization can be certified by a third party.
The environment cannot be protected by our convictions or goodwill alone. Efforts to protect the environment must be planned, coordinated and organized into a system, such as ISO 14001.
ISO14001 requires an Environmental Policy to be in existence within the organisation, fully supported by senior management, and outlining the policies of the company, not only to the staff but to the public. The policy needs to clarify compliance with Environmental Legislation that may effect the organization and stress a commitment to continuous improvement. Emphasis has been placed on policy as this provides the direction for the remainder of the Management System.
Those companies who have witnessed ISO9000 Assessments will know that the policy is frequently discussed during the assessment, many staff are asked if they understand or are aware of the policy, and any problems associated with the policy are seldom serious. The Environmental Policy is different, this provides the initial foundation and direction for the Management System and will be more stringently reviewed than a similar ISO9000 policy. The statement must be publicised in non-technical language so that it can be understood by the majority of readers. It should relate to the sites within the organisation encompassed by the Management System, it should provide an overview of the company’s activities on the site and a description of those activities. A clear picture of the company’s operations.
The preparatory review and definition of the organization’s environmental effects is not part of a ISO14001 Assessment, however examination of this data will provide an external audit with a wealth of information on the methods adopted by the company. The preparatory review itself should be comprehensive in consideration of input processes and output at the site. This review should be designed to identify all relevant environmental aspects that may arise from existence on the site. These may relate to current operations, they may relate to future, perhaps even unplanned future activities, and they will certainly relate to the activities performed on site in the past (i.e. contamination of land).
The initial or preparatory review will also include a wide-ranging consideration of the legislation which may effect the site, whether it is currently being complied with, and perhaps even whether copies of the legislation are available. Many of the environmental assessments undertaken already have highlighted that companies are often unaware of ALL of the legislation that affects them, and being unaware, are often not meeting the requirements of that legislation.
The company will declare its primary environmental objectives, those that can have most environmental impact. In order to gain most benefit these will become the primary areas of consideration within the improvement process, and the company’s environmental program. The program will be the plan to achieve specific goals or targets along the route to a specific goal and describe the means to reach those objectives such that they are real and achievable. The Environmental Management System provides further detail on the environmental program. The EMS establishes procedures, work instructions and controls to ensure that implementation of the policy and achievement of the targets can become a reality. Communication is a vital factor, enabling people in the organisation to be aware of their responsibilities, aware of the objectives of the scheme, and able to contribute to its success.
As with ISO9000 the Environmental Management System requires a planned comprehensive periodic audit of the Environmental Management System to ensure that it is effective in operation, is meeting specified goals, and the system continues to perform in accordance with relevant regulations and standards. The audits are designed to provide additional information in order to exercise effective management of the system, providing information on practices which differ to the current procedures or offer an opportunity for improvement.
In addition to audit, there is a requirement for Management Review of the system to ensure that it is suitable (for the organization and the objectives) and effective in operation. The management review is the ideal forum to make decisions on howe to improve for the future.
The newly revised ISO 14001:2004 specifies the requirements for an environmental management system (EMS), which provides a framework for an organization to control the environmental impacts of its activities, products and services, and to continually improve its environmental performance. It applies to those environmental aspects which the organization can control and over which it can be expected to have an influence. It does not itself state specific environmental performance criteria. ISO 14001:2004 is applicable to any organization that wishes to:
· implement, maintain and improve an environmental management system
· assure itself of its conformance with its stated environmental policy
· demonstrate such conformance to others
· seek certification/registration of its environmental management system by an external organization
· make a self-determination and self-declaration of conformance with this international standard.
All the requirements in this standard can be incorporated into any environmental management system. Having been revised, the improved ISO 14001 is now expected to bring the benefits of implementing an EMS to more businesses than ever. The standard is now easier to understand and use and has more detailed checklists for inputs and outputs from the management review and has increased compatibility to ISO 9001. Organizations who are currently registered to ISO 14001:1996 will have an 18-month transition period to register to ISO 14001:2004.

ISO 9001 & ISO 14001 Blog

2009-09-09T06:54:00.000-07:00

http://www.iso9001-standard.us

ISO 9001:2008 Requirements – QMS

2009-09-09T06:53:00.000-07:00

ISO 9001:2008 Requirements – Quality Management System
Establish, document, implement, and maintain a quality management system. Continually improve its effectiveness in accordance with ISO 9001 requirements. Implement the system to:? Determine processes needed for the quality management system (and their application throughout the organization)? Determine process sequence and interaction? Determine criteria and methods for process operation and control? Ensure resources and supporting information are available? Monitor, measure where applicable, and analyze these processes? Implement actions to achieve planned results and continual process improvementManage these processes in accordance with ISO 9001 requirements. Define the type and extent of control applied to any outsourced processes that affect product conformity to requirements.NOTE 1: Processes needed for the quality management system include the processes for management activities (see 5), provision of resources (see 6), product realization (see 7), and measurement, analysis, and improvement (see 8).NOTE 2: An outsourced process is a process the organization needs for its quality management system, and which the organization chooses to have performed by an external party.NOTE 3: Ensuring control over outsourced processes does not absolve your organization of the responsibility to conform to all customer, statutory, and regulatory requirements. The type and extent of control applied to an outsourced process can be influenced by factors such as:? Potential impact of the outsourced process on your organization’s capability to provide product that conforms to requirements? Degree to which the control for the process is shared? Capability of achieving the necessary control through the application of 7.4

ISO 9001 Management Representative

2009-09-03T08:00:00.000-07:00

The ISO 9001 Management Representative is appointed by the top management of an organization. Irrespective of other responsibilities, he/she is responsible and has the authority in
ensuring that processes needed for the quality management system are established, implemented and maintained,
reporting to top management on the performance of the quality management system and any need for improvement, and
ensuring the promotion of awareness of customer requirements throughout the organization.
The responsibility of the Management Representative also includes liaison with external parties on matters relating to the quality management system.
The Management Representative is usually assisted at the departmental level by Quality Representatives. This position is assumed by the respective Department Managers. The Quality Representatives are responsible for the quality processes which are applicable to their respective departments.
The Quality Representatives head their respective Quality Improvement Teams which are established for the purpose of monitoring processes and identifying opportunities for improvements. Members of the Quality Improvement Teams comprise of key personnel within the departments/process areas who are appointed by the Quality Representative to assist him/her at the process-level.
The Management Representative is also assisted by an appointed Document Controller whose responsibility is to implement the Control of Documents and Control of records procedures.
Collectively, the Management Representative, Quality Representatives and the Document Controller make up the Quality Management System Committee. This committee meets regularly to provide relevant inputs and resolutions for the quality management system. The structure of the Quality Management System Committee is as follows:
Management Representative – Chairman
Document Controller – Secretary
Quality Representatives – Members
[Note: The above is just an example. If you are a small organization, a QMS Committee and Quality Improvement Teams may not be necessary]
To facilitate effecetive communications, the Quality Management System Committee and the Quality Improvement Teams, respectively, meet regularly in order to ensure that communication regarding the effectiveness of the quality management system takes place. Pertinent information regarding the quality management system is then posted by the Management Representative on the Bulletin Board for the benefit of all employees. Employees are generally encouraged to provide their inputs towards the quality management system through suggestion boxes which are located at strategic locations within the organization’s premises.
Note: Some organizations employ this method but results may vary among other organizations. The key is to continually improve on these methods/processes

Introduction to ISO Certification

2009-09-03T07:58:00.000-07:00

Introduction to ISO Certification
Posted by everise iso 14001, iso 9001 standard Wednesday 2 September 2009 5:43 am
Certification is a way to attest, by the intermediary of a third-party certifier, to a company’s ability to provide a service, product or system in accordance with client requirements and regulation requirements. ISO and IEC give the following definition:
Procedure by which a third party gives written assurancethat a product, process or service complies with the requirementsspecified in a benchmark.The ISO 9000 family of standards corresponds to all the management best practices benchmarks as regards quality, which are defined by ISO (the International Organisation for Standardization).
ISO 9000 standards were originally written in 1987, with revisions taking place in 1994 and 2000. Thus, the 2000 version of the ISO 9001 standard, which is part of the ISO 9000 family, is written “ISO 9001:2000″. The ISO 9001:2000 standard mainly focuses on the processes used to produce a service or product, whereas the ISO 9001:1994 standard was mainly focused on the product itself. Here is an overview of all the different standards in the ISO 9000 family:
ISO 9000: “Quality Management Systems – Basic Principles and Vocabulary”. The ISO 9000 standard describes the principles of a quality management system and defines the terminologyISO 9001: “Quality Management Systems – Requirements”. The ISO 9001 standard describes the requirements relative to a quality management system either for internal use or for contractual or certification purposes. Therefore, this standard is a group of requirements that companies must followISO 9004: “Quality Management Systems – Guidelines for Improving Performance”. This standard, which is intended for internal use and not for contractual purposes, focuses particularly on continually improving performanceISO 10011: “Guidelines for auditing quality management and/or environmental management systems”

Preparing the ISO 9001 quality manual

2009-08-31T05:06:00.002-07:00

The standard requires a quality manual to be establishedand maintained that includes the scope of the qualitymanagement system, the documented procedures or refer-ence to them and a description of the sequence andinteraction of processes included in the quality manage-ment system.
ISO 9000 defines a quality manual as a documentspecifying the quality management system of an organi-zation. It is therefore not intended that themanual be a response to the requirements ofISO 9001. As the top-level document describingthe management system it is a system descriptiondescribing how the organization is managed.Countless quality manuals produced to satisfy ISO 9000 :2008, were nomore than 20 sections that paraphrased the requirements of the standard.Such documentation adds no value. They are of no use to managers, staff orauditors. Often thought to be useful to customers, organizations would gainno more confidence from customers than would be obtained from theirregistration certificate.
This requirement responds to the System Approach Principle.A description of the management system is necessary as a means of showinghow all the processes are interconnected and how they collectively deliver thebusiness outputs. It has several uses as :a means to communicate the vision, values, mission, policies and objectivesof the organizationa means of showing how the system has been designeda means of showing linkages between processesa means of showing who does whatan aid to training new peoplea tool in the analysis of potential improvementsa means of demonstrating compliance with external standards and regulations
When formulating the policies, objectives and identifying the processes toachieve them, the manual provides a convenient vehicle for containing suchinformation. If left as separate pieces of information, it may be more difficult tosee the linkages.The requirement provides the framework for the manual. Its content maytherefore include the following:1 Introduction(a) Purpose (of the manual)(b) Scope (of the manual)(c) Applicability (of the manual)(d) Definitions (of terms used in the manual)2 Business overview(a) Nature of the business/organization – its scope of activity, its productsand services(b) The organization’s interested parties (customers, employees, regulators,shareholders, suppliers, owners etc.)(c) The context diagram showing the organization relative to its externalenvironment(d) Vision, values(e) Mission3 Organization(a) Function descriptions(b) Organization chart(c) Locations with scope of activity4 Business processes(a) The system model showing the key business processes and how they areinterconnected(b) System performance indicators and method of measurement(c) Business planning process description(d) Resource management process description(e) Marketing process description(f) Product/service generation processes description(g) Sales process description(h) Order fulfilment process description5 Function matrix (Relationship of functions to processes)6 Location matrix (Relationship of locations to processes)7 Requirement deployment matrices(a) ISO 9001 compliance matrix(b) ISO 14001 compliance matrix(c) Regulation compliance matrices (FDA, Environment, Health, Safety,CAA etc.)8 Approvals (List of current product, process and system approvals)

Continual improvement in the quality management In ISO 9001

2009-08-31T05:06:00.001-07:00

Continual improvement in the quality management system and its processes In ISO 9001
The standard requires the organization to continually improve the effectiveness of the quality management system in accordance with the requirements of ISO 9001 and to implement action necessary to achieve planned results andcontinual improvement of the identified processes.
ISO 9000 defines continual improvement as a recurring activity to increase the ability to fulfil requirements. As the organization’s objectives are its requirements, continually improving the effectiveness of the management system means continually increasing the ability of the organization to fulfil its objectives.
This requirement responds to the Continual Improvement principle. If the management system is enabling the organization to accomplish its objectives when that is its purpose, why improve? The need for improvement arises out of a need to become more effective at what you do, more efficient in the utilization of resources so that the organization becomes best in its class. The purpose of measuring process performance is to establish whether or not the objectives are being achieved and if not to take action on the difference. If the performance targets are being achieved, opportunities may well exist to raise standards and increase efficiency and effectiveness.
If the performance of a process parameter is currently meeting the standard that has been established, there are several improvement actions you can take:Raise the standard e.g. if the norm for the sales ratio of orders won to all orders bid is 60%, an improvement programme could be developed for raising the standard to 75% or higherIncrease efficiency e.g. if the time to process an order is within limits, identify and eliminate wasted resources Increase effectiveness e.g. if you bid against all customer requests, by only bidding for those you know you can win you improve your hit rate
You can call all these actions improvement actions because they clearly improve performance. However, we need to distinguish between being better at what we do now and doing new things. Some may argue that improving efficiency is being better at what we do now, and so it is – but if in order to improve efficiency we have to be innovative we are truly reaching new standards. Forty years ago, supervisors in industry would cut an eraser in half in the name of efficiency rather than hand out two erasers. Clearly this was a lack of trust disguised as efficiency improvement and it had quite the opposite effect. In fact they were not only increasing waste but also creating a hostile environment.
Each of the improvement actions is dealt with later in the book and the subject of continual improvement addressed again under Quality planning in Chapter 5. There are several steps to undertaking continual improvement (Juran, J. M., 1995)12 .1 Determine current performance2 Establish the need for change3 Obtain commitment and define the improvement objectives4 Organize diagnostic resources5 Carry out research and analysis to discover the cause of currentperformance6 Define and test solutions that will accomplish the improvementobjectives7 Product improvement plans which specify how and by whom the changeswill be implemented8 Identify and overcome any resistance to change9 Implement the change10 Put in place controls to hold new levels of performance and repeat step one.

Migration to ISO 9001:2008

2009-08-31T05:05:00.001-07:00

Migration To ISO 9001:2008The International Accreditation Forum (IAF) and the International Organization forStandardization (ISO) have agreed on an implementation plan to ensure a smooth transition ofaccredited certification to ISO 9001:2008, the latest version of the world’s most widely usedstandard for quality management systems (QMS). The details of the plan are given in the jointcommuniqué by the two organizations which appears below.Like all of ISO’s more than 17 000 standards, ISO 9001 is periodically reviewed to ensure that itis maintained at the state of the art and a decision taken to confirm, withdraw or revise thedocument.ISO 9001:2008, which is due to be published before the end of the year, will replace the year2000 version of the standard which is implemented by both business and public sectororganizations in 170 countries. Although certification is not a requirement of the standard, theQMS of about one million organizations have been audited and certified by independentcertification bodies (also known in some countries as registration bodies) to ISO 9001:2000.ISO 9001 certification is frequently used in both private and public sectors to increaseconfidence in the products and services provided by certified organizations, between partnersin business-to-business relations, in the selection of suppliers in supply chains and in the rightto tender for procurement contracts.ISO is the developer and publisher of ISO 9001, but does not itself carry out auditing andcertification. These services are performed independently of ISO by certification bodies. ISOdoes not control such bodies, but does develop voluntary International Standards toencourage good practice in their activities on a worldwide basis. For example, ISO/IEC17021:2006 specifies the requirements for bodies providing auditing and certification ofmanagement systems.Certification bodies that wish to provide further confidence in their services may apply to be“accredited” as competent by an IAF recognized national accreditation body. ISO/IEC17011:2004 specifies the requirements for carrying out such accreditation. IAF is aninternational association whose membership includes the national accreditation bodies of 49economies.ISO technical committee ISO/TC 176, Quality management and quality assurance, which isresponsible for the ISO 9000 family of standards, is preparing a number of support documentsexplaining what the differences are between ISO 9001:2008 and the year 2000 version, whyand what they mean for users. Once approved, these documents will be posted on the ISOWeb site – probably in October 2008.
ISO (International Organization for Standardization) and the IAF (International AccreditationForum) have agreed an implementation plan to ensure a smooth migration of accreditedcertification to ISO 9001:2008, after consultation with international groupings representingquality system or auditor certification bodies, and industry users of ISO 9001 certificationservices.ISO 9001:2008 does not contain any new requirementsThey have recognized that ISO 9001:2008 introduces no new requirements. ISO 9001:2008only introduces clarifications to the existing requirements of ISO 9001:2000 based on eightyears of experience of implementing the standard world wide with about one millioncertificates issued in 170 countries to date. It also introduces changes intended to improveconsistency with ISO14001:2004The agreed implementation plan in relation to accredited certification is therefore thefollowing:Accredited certification to the ISO 9001:2008 shall not be granted until the publication of ISO9001:2008 as an International Standard.Certification of conformity to ISO 9001:2008 and/or national equivalents shall only be issuedafter official publication of ISO 9001:2008 (which should take place before the end of 2008)and after a routine surveillance or recertification audit against ISO 9001:2008.Validity of certifications to ISO 9001:2000One year after publication of ISO 9001:2008 all accredited certifications issued (newcertifications or recertifications) shall be to ISO 9001:2008.Twenty four months after publication by ISO of ISO 9001:2008, any existing certification issuedto ISO 9001:2000 shall not be valid.

Scope of the ISO 9001 quality management system

2009-08-30T16:28:00.000-07:00

The standard requires the quality manual to include the scope of the quality management system including details of justification for any exclusion.
The standard addresses activities that may not be relevant or applicable to an organization. The permissible exclusions are explained in section 1.2 of ISO 9001. Here it states that the organization may only exclude requirements that neither affect the organization’s ability, nor its responsibility to provide product that meets customer and applicable regulatory requirements. The requirements for which exclusion is permitted are limited to those in section 7 of the standard.
Under ISO 9000 :2008, it was possible for organizations to exclude functions and processes of their organization that may have been difficult to control or were not part of the order fulfilment cycle. Organizations that designed their own products but not for specific customers could escape bringing these operations into the management system. Marketing was omitted because itoperated before placement of order. Accounting, Administration, Maintenance, Publicity, Public Relations and After Sales Support functions were often omitted because there were no requirements in the standard that specifically dealt with such activities. As there is no function in an organization that does not directly or indirectly serve the satisfaction of interested parties, it is unlikely that any function or process will now be excluded from the management system.
This requirement responds to the System Approach Principle.It is sensible to describe the scope of the management system so as to ensure effective communication. The scope of the management system is one area that generates a lot of misunderstanding particularly when dealing with auditors, consultants and customers. When you claim you have a management system that meets ISO 9001 it could imply that you design, develop, install and service the products you supply, when in fact you may only be a distributor.
Why you need to justify specific exclusions is uncertain because it is more practical tojustify inclusions.
The scope of the management system is the scope of the organization. There is no longer any reason to exclude locations, activities, functions or processes for which there is no requirement in the standard. The reason is because the ISO 9000 family now serves customer satisfaction and is not limited to quality assurance as were the 1994 versions of ISO 9001, ISO 9002 and ISO 9003.
It is not appropriate to address exclusions by inserting pages in the manual corresponding to the sections of the standard and adding justification if not within the scope of the management system – such as ‘We don’t do this!’. It is much more appropriate to use an appendix as indicated previously in the manual contents list. By describing the nature of the business, you are establishing boundary conditions. If in doing so you do not mention that you design products, it will be interpreted that design is not applicable. For exclusions relative to detail requirements, the Compliance Matrix may suffice but for an unambiguous solution, it is preferable to produce an exposition that addresses each requirement of the standard.

Managing processes In ISO 9001 Standard

2009-08-30T16:27:00.000-07:00

The standard requires the organization to manage the identified processes in accordance with the requirements of ISO 9001. The first stage in managing a process is to establish what it is you are trying to achieve, what requirements you need to satisfy, what goals you are aiming at; then establish how you will measure your achievements. The next stage is to define the process you will employ to deliver the results. Managing the process then involves managing all the inherentcharacteristics of the process in such a manner that the requirements of customers and interested parties are fulfilled by the process outcomes. This means:Managing the process inputsManaging the workManaging the physical resourcesManaging the financial resourcesManaging the human resourcesManaging the constraintsManaging the outputs
Process management is therefore much more than managing activities and therefore when describing processes, one needs more than a flow chart of activities. The chart is a diagrammatical representation of a process but only one aspect. One can also add numerical data to the charts to indicate resources, cycle times, delays, costs etc. but the intangible factors of the human environment cannot be reduced to numerical data to add to the charts.
The notes to clause 4.1 of ISO 9001 need some explanation. It is stated that the processes needed for the management system include management activities, provision of resources, product realization and measurement. This note could cause confusion because it suggests that these are the processes that are needed for the management system. It would be unwise to use this as the model and far better to identify the processes from observing how the business operates. The term provision of resources should be Resource Management, which is thecollection of processes covering financial, human and physical resources.
Product realization is also a collection of processes such as design, production, service delivery, etc. Measurement is not a single process but a sub-process within each process. Grouping all the measurement processes together serves no useful purpose except it matches the standard – a purpose of little value in managing the organization.
The second note refers to outsourcing processes although it is difficult to imagine that management activities, product realization or measurement would be outsourced in its entirety. It is likely that market research; design, product verification, equipment calibration and other specialized services may be outsourced. While outsourcing comes under purchasing, it is correct to point out that the organization should control any outsourced processes. The supplier of the process is usually referred to as a subcontractor because they provide services to the organization’s requirements not their own. Control of subcontractors is covered by clause 7.4 but in meeting clause 7.4.3, you need to treat suppliers and subcontractors differently.

ISO 9001 Quality Policy

2009-08-30T16:26:00.000-07:00

On customersWe will listen to our customers, understand and balance their needs andexpectations with those of our suppliers, employees, investors and society andendeavour to give full satisfaction to all parties.On leadershipWe will establish and communicate our vision for the organization and throughour leadership exemplify core values to guide the behaviour of all to achieve ourvision.On peopleWe will involve our people in the organization’s development, utilize theirknowledge and experience, recognize their contribution and provide an environ-ment in which they are motivated to realize their full potential.On processes and systemsWe will take a process approach towards the management of work and manage ourprocesses as a single system of interconnected processes that delivers all theorganization’s objectives.On continual improvementWe will provide an environment in which every person is motivated tocontinually improve the efficiency and effectiveness of our products, processes andour management system.On decisionsWe will base our decisions on the logical and intuitive analysis of data collectedwhere possible from accurate measurements of product, process and systemcharacteristics.On supplier relationshipsWe will develop alliances with our suppliers and work with them to jointlyimprove performance.http://www.iso-consults.com http://www.iso9001store.com http://www.iso14000store.com

ISO 9001:2008 Quality Management System Standard

2009-08-30T16:25:00.000-07:00

ISO 9001:2008 is the world most successful standard addressing best practice in the application of quality management systems.
The standard is based around the principles of customer satisfaction, continual improvement and the development of a process based quality management system. Although not referenced in the standard itself the ISO 9001:2008 document is underpinned by eight key quality management principles;
a customer focused organisation
leadership
the involvement of people
ensuring a process approach
a systematic approach to management
a factual approach to decision making
mutually beneficial supplier relations
continuous improvement
ISO 9001:2008 has been written to ensure that its guiding principles are equally relevant to all sectors of industry and to all types of organisation. Although containing requirements to control the key processes within an organisation, it only requires six documented procedures. The standard emphasises the need for an organisation to continually monitor their own processes and systems, with many clauses making reference to self monitoring or measurement or both. This emphasis aims for an integrated approach to business processes. Instead of operating to a business plan on one hand and a quality management system on the other, the standard aims to integrate both of these functions into one system.
What is a quality management system?ISO 9001:2008 is a standard that specifies criteria for a quality management system (QMS). A QMS incorporates those elements of an organisations management system that direct and control it with regard to quality. Such a system will need to be supported by top management who will need to be able to demonstrate management commitment.
How do you demonstrate management commitment?Management commitment is one of the cornerstones of ISO 9001:2008, requiring top management to develop and improve the QMS throughout the organisation. This commitment can be demonstrated by a number of methods including creating a quality policy, conducting management reviews and establishing quality objectives.
What is a quality policy?ISO 9001:2008 specifies that an organisation must have a quality policy that documents the organisations overall intentions and direction related to quality as formally expressed by top management. Such a policy will include a commitment to comply with ISO 9001:2008, to continuously improve the QMS and to set and monitor measurable quality objectives.
What are quality objectives?The quality objectives are those targets sought or aimed for by the organisation that are related to quality. These quality objectives must be SMART (suitable, measurable, achievable, reviewed and timely). Examples of quality objectives might be; to reduce machine down time by 20% or to reduce rework costs by ?00 p/m. Whatever quality objectives are chosen they must be meaningful and adequately resourced by the organisation.
What is a management review?A management review is a key element of how the top management of an organisation can assess its performance in terms of the objectives it sets itself, the requirements set by the standard and how its systems are operating. Normally, a management review is a regular meeting of the top management team and uses the information that the organisation? systems have derived. It is a useful forum to review and revise quality objectives.
What are internal audits and why do I need to carry them out?Internal audit is one of the key monitoring processes required by the standard and functions as a check on the organisation? systems. It is the opportunity for an organisation to determine compliance to the systems it has established and maintained to meet the needs of its customers and identify opportunities for improvement. Internal audit can be seen as a ealth check?for an organisation.
The ore?of ISO 9001:2008, Product realisationClause 7 of ISO 9001:2008 contains the core processes that most organisations carry out. Any clause or sub-clause in section 7 can be excluded from an organisations quality management system if it can be justifiably excluded. Examples of common exclusions are clause 7.3 design and development, clause 7.5.3 traceability and clause 7.6 the control of monitoring and measuring devices. Clauses can only be excluded if their exclusion does not affect the company? ability to provide a product or service that meets customer requirements.
These core processes should be managed and controlled via the quality management system, and are evaluated for effectiveness and suitability by the internal audits with feed back into the management review.
This is a clear demonstration of one of the key principles of ISO 9001:2008, continuous improvement by critical self-evaluation. The output from the self-evaluation is fed into a planning stage to determine actions needed to improve the system. Following the planning and consultation comes the action phase where the proposed changes are implemented. Then the cycle starts again by checking that the changes are effective and meaningful by self-evaluation.
Other requirements of section 7 are;Product planning to ascertain and then implement the necessary controls and resources to ensure product realisation.
Purchasing control to verify purchased product against comprehensive purchasing information and the selection and evaluation of suppliers.
Production and service provision to ensure that this activity is carried out in controlled conditions and that any processes that cannot be verified during production are validated to ensure capability. Where appropriate the product must be identified, and if required, traceable at all stages of production. Any customer property must be identified and protected from harm and all products must be stored and handled in such a way to preserve product conformity.
Any monitoring and measuring devices needed to provide evidence of product conformity must be identified and if necessary calibrated.
But what about the customer? All of the clauses in ISO 9001:2008 are in some way focused towards meeting and exceeding the customer? expectations. For example the requirement of management to determine and communicate the importance of customer requirements throughout the organisation, and the review of customer orders to ensure that they can be met. Companies are required to implement methods for effective communication with the client at all stages of the business including ascertaining customer satisfaction after the product or service has been delivered as well as resolving customer complaints.
Finally?ISO 9001:2008 is widely acclaimed as being the pre-eminent specification for quality management systems, it requires a company to look at itself and ask the question, ‘how can we improve?’ An ISO 9001:2008 management system should be an essential part of any business process, requiring continual improvement by self-evaluation with a goal of ensuring that current and future customer expectation can be met and exceeded.
If you have any queries concerning ISO 9001:2008 please visit http://www.iso-consults.com/

QUALITY MANAGEMENT WITH ISO 9000

2009-08-27T03:20:00.000-07:00

The methods and tools of quality management and quality assurance have evolved over many decades to a remarkable degree of perfection. From the times of early civilization up to the industrial Revolution, quality was the responsibility of the craftsman who made the product according to his own design, or that of his customers. With the beginning of the Industrial Revolution, when large numbers of workers were engaged to produce similar products in large quantities, quality progressively became the responsibility of the shop foreman or supervisor, who was usually selected from among experienced workers.
In the 1930s, with the beginning of manufacture of interchangeable components, inspection departments started to be introduced in firms. Their function was mainly to sort good products from bad. Inspection departments represented the separation of the quality and production functions and brought to the scene specialized inspectors and sophisticated measuring and testing equipment. In the 1940s, with the dramatic increases in production due to the war, Statistical Quality Control techniques were introduced to reduce the cost of inspection work, which had become huge with the mass production of military products.
By the end of the 1950s, Quality Control Departments existed in most manufacturing companies. Their activities usually embraced the operational techniques applied to achieve quality, including both monitoring and corrective action. In the 1970s, led by the remarkable quality revolution in Japan, the concept of Total Quality Control gained very wide acceptance.
It asserted that quality was the result of a large number of interacting activities carried out by the different departments of the organization – activities that began with the identification of the needs of the customer or consumer and continued until assessments showed these needs had been satisfied.
The different stages involved constitute what is called the “quality loop”. The concept of departmentalized quality control had, by then, evolved to a broader concept: Quality Assurance, which was defined as “all the planned and systematic actions necessary to provide confidence that a product or service satisfies quality requirements”. This evolution of quality concepts led naturally, in the 1980s, to a further broadening of the quality concept.
Today we speak of Total Quality Management which can be applied in any organization, and is perceived as “the totality of management commitment to and implementation of its own self- defined quality policy”. It includes every aspect of the overall management function of an organization. In 1979 the member of ISO and IEC for the United Kingdom, the British Standards Institution (BSI), submitted a formal proporsal to ISO that a new technical committee should be formed to prepare International Standards relating to quality assurance techniques and practices. The new technical committee was approved and given a number (ISO/TC 176), a title (Quality Assurance) a scope, and a secretariat (Canada) according to the usual ISO/IEC procedures. Twenty member countries decided to become active participants in the work (P-members) of this new committee when it was set up and another fourteen countries opted to follow the work as observers (O-members).
Today, the number of countries actively participating in ISO/TC 176 is 42 P – members and 21 O – members. There had already been a substantial base of national experience in the UK and Canada. In the UK, the BS 5750 standards were well on their way to broad acceptance and in Canada a series of national standards known as CSA Z299 were also widely used. Naturally, there were some differences in the approaches taken in the UK and Canada, and also a recognition on both sides of the Atlantic that both sets of standards could be improved. Other countries with well-developed quality management practices such as Japan were also starting to take a knee interest, so the programme of ISO/TC 176 quickly became a substantial work effort.
The first editions of the ISO 9000 standards (9000 to 9004) were completed in 1986 and published in the early part of 1987. Up to this point, one could have said that the existence of the ISO 9000 standards was not a very unsual kind of international standardization event. A new committee had been formed, it had taken about five years to produce its first major set of standards, and we would wait and see how well these standards came to be accepted.

ISO 9000 – Benefits and Problems

2009-08-27T03:14:00.000-07:00

ISO 9000 has received much publicity. Some managers see it as a prerequisite for conducting business. For others, it substitutes for the difficulties and vagaries of Total Quality Management (TQM). Some see only a needless bureaucratic boondoggle. Depending on the situation, any of these views might be correct.
Sensibly applied, ISO 9000 is a qualifier for international markets or specific domestic customers. Certification can be a valuable marketing tool. The standards are a sound blueprint for a quality system. They can lead the way to the more difficult and sophisticated approaches of Total Quality Management. ISO 9000 can improve a company’s cost structure by 5%-20%.
Approached unwisely, ISO 9000 can be costly and unproductive. It may create a quality bureaucracy which adds to the cost structure and slows product development. It can focus people on paperwork instead of customers. It can divert management concentration and energy from more vital issues.