ISO 9000 Standards – Quality Management Principles

ISO 9000 Standards – Quality Management Principles
A quality management principle is defined by ISO/TC 176 as a comprehensive and fundamental rule or belief, for leading and operating an organization, aimed at continually improving performance over the long term by focusing on customers while addressing the needs of all other interested parties. Eight principles have emerged as fundamental to the management of quality.

All the requirements of ISO 9001:2008 are related to one or more of these principles. These principles provide the reasons for the requirements and are thus very important. The quality management principles can be listed as below:

1. Customer focus
Organizations depend on their customers and therefore should understand current and future customer needs, meet customer requirements and strive to exceed customer expectations.
The customer focus principle is reflected in ISO 9000 Standards through the requirements addressing:
a. Communication with the customer
b. Care for customer property
c. The determination of customer needs and expectations
d. Appointment of a management representative
e. Management commitment

2. Leadership
Leaders establish unity of purpose and direction for the organization. They should create and maintain the internal environment in which people can become fully involved in achieving the organization’s objectives.
The leadership principle is reflected in ISO 9000 Standards through the requirements addressing:
a. The setting of objectives and policies
b. Planning
c. Internal communication
d. Creating an effective work environment

3. Involvement of people
People at all levels are the essence of an organization and their full involvement enables their abilities to be used for the organization’s benefit.
The involvement of people principle is reflected in ISO 9000 Standards through the requirements addressing:
a. Participation in design reviews
b. Defining objectives, responsibilities and authority
c. Creating an environment in which people are motivated
d. Internal communication
e. Identifying competence needs

4. Process approach
A desired result is achieved more efficiently when related resources and activities are managed as a process.
The process approach principle is reflected in ISO 9000 Standards through the requirements addressing:
a. The identity of processes
b. Defining process inputs and outputs
c. Providing the infrastructure, information and resources for processes to
function

5. System approach to management
This principle is expressed as follows:
Identifying, understanding and managing interrelated processes as a system contributes to the organization’s effectiveness and efficiency in achieving its objectives.
The system approach principle is reflected in ISO 9001 through the requirements addressing:
a. Establishing, implementing and maintaining the management system
b. Interconnection, interrelation and sequence of processes
c. The links between processes
d. Establishing measurement processes

6. Continual improvement
This principle is expressed as follows:
Continual improvement of the organization’s overall performance should be a permanent objective of the organization.
The continual improvement principle is reflected in ISO 9000 Standards through the requirements addressing:
a. Improvement processes
b. Identifying improvements
c. Reviewing documents and processes for opportunities for improvement

7. Factual approach to decision making
This principle is expressed as follows:
Effective decisions are based on the analysis of data and information.
The factual approach principle is reflected in ISO 9000 Standards through the requirements addressing:
a. Reviews, measurements and monitoring to obtain facts
b. Control of measuring devices
c. Analysis to obtain facts from information
d. Records for documenting the facts
e. Approvals based on facts

8. Mutually beneficial supplier relationships
This principle is expressed as follows:
An organization and its suppliers are interdependent and a mutually beneficial relationship enhances the ability of both to create value.
The mutually beneficial supplier relationships principle is reflected in ISO 9000 Standardsthrough the requirements addressing:
a. Control of suppliers
b. Evaluation of suppliers
c. Analysis and review of supplier data

ISO 9000 Standards – Retention Of Records

ISO 9000 Standards – Retention Of Records
It is important that records are not destroyed before their useful life is over.
There are several factors to consider when determining the retention time for records.
The duration of the contract – some records are only of value whilst the contract is in force.
The life of the product – access to the records will probably not be needed for some considerable time, possibly long after the contract has closed. On defence contracts the contractor has to keep records for up to 20 years and
for product liability purposes, in the worst-case situation (taking account of
appeals) you could be asked to produce records up to 17 years after you made the product.
The period between management system assessments – assessors may wish to see evidence that corrective actions from the last assessment were taken. If the period of assessment is three years and you dispose of the evidence after 2 years, you will have some difficulty in convincing the assessor that you corrected the deficiency.
You will also need to take account of the subcontractor records and ensure
adequate retention times are invoked in the contract.
Where the retention time is actually specified can present a problem. If you
specify it in a general procedure you are likely to want to prescribe a single
figure, say 5 years for all records. However, this may cause storage problems – it may be more appropriate therefore to specify the retention times in the procedures that describe the records. In this way you can be selective.
You will also need a means of determining when the retention time has
expired so that if necessary you can dispose of the records. The retention time doesn’t mean that you must dispose of them when the time expires – only that you must retain the records for at least that stated period. Not only will the records need to be dated but the files that contain the records need to be dated and if stored in an archive, the shelves or drawers also dated. It is for this reason that all documents should carry a date of origin and this requirement needs to be specified in the procedures that describe the records. If you can rely on the selection process a simple method is to store the records in bins or computer disks that carry the date of disposal.
While the ISO 9000 requirement applies only to records, you may also need to retain tools, jigs, fixtures, test software – in fact anything that is needed to repair or reproduce equipment in order to honour your long-term commitments.
Should the customer specify a retention period greater than what you
prescribe in your procedures, special provisions will need to be made and this is a potential area of risk. Customers may choose not to specify a particular time and require you to seek approval before destruction. Any contract that requires you to do something different creates a problem in conveying the requirements to those who are to implement them. The simple solution is to persuade your customer to accept your policy. You may not want to change your procedures for one contract. If you can’t change the contract, the only alternative is to issue special instructions. You may be better off storing the records in a special contract store away from the normal store or alternatively attach special labels to the files to alert the people looking after the archives.

comments

ISO 9000 Standards – Document Approval

ISO 9000 Standards – Document Approval
The ISO 9000 Standards requires that documents be approved for adequacy prior to issue.

Approval prior to issue means that designated authorities have agreed the document before being made available for use. Whilst the term ade-
quacy is a little vague it should be taken as meaning that the document is judged as fit for the intended purpose. In a paper based system, this means approval before the document is distributed. With an electronic system, it means that the documents should be approved before they are published or made available to the user community.

The ISO 9000 Standards document control process needs to define the process by which documents are approved. In some cases it may not be necessary for anyone other than the approval authority to examine the documents. In others it may be necessary to set up a panel of reviewers to solicit their comments before approval is given.
It all depends on whether the approval authority has all the information
needed to make the decision and is therefore ‘competent’. One might think that the CEO could approve any document in the organization but just because a person is the most senior executive does not mean he or she is competent to perform any role in the organization.

Users should be the prime participants in the approval process so that the
resultant documents reflect their needs and are fit for the intended purpose. If the objective is stated in the document, does it fulfil that objective? If it is stated that the document applies to certain equipment, area or activity, does it cover that equipment, area or activity to the depth expected of such a document? One of the difficulties in soliciting comments to documents is that you will gather comment on what you have written but not on what you have omitted. A useful method is to ensure that the procedures requiring the document specify the acceptance criteria so that the reviewers and approvers can check the document against an agreed standard.

To demonstrate documents have been deemed as adequate prior to issue,
you will need to show that the document has been processed through the
prescribed document approval process. Where there is a review panel, a simple method is to employ a standard comment sheet on which reviewers can indicate their comments or signify that they have no comment. During the drafting process you may undertake several revisions. You may feel it
necessary to retain these in case of dispute later, but you are not required to do so. You also need to show that the current issue has been reviewed so your comment sheets need to indicate document issue status.

ISO 9001 Standards – Design and Development

ISO 9001 Standards - Design and Development

Plan and control the product design and development. This planning must determine the:Identify problems and propose any necessary actions

- Stages of design and development

- Appropriate review, verification, and validation activities for each stage

- Responsibility and authority for design and development

The interfaces between the different involved groups must be managed to ensure effective communication and the clear assignment of responsibility. Update, as appropriate, the planning output during design and development.

NOTE: Design and development review, verification, and validation have distinct purposes. They can be conducted and recorded separately or in any combination, as deemed suitable for the product and the organization.

Determine product requirement inputs and maintain records. The inputs must include:

- Functional and performance requirements

- Applicable statutory and regulatory requirements

- Applicable information derived from similar designs

- Requirements essential for design and development

Review these inputs for adequacy. Resolve any incomplete, ambiguous, or conflicting requirements.

Document the outputs of the design and development process in a form suitable for verification against the inputs to the process. The outputs must:

- Meet design and development input requirements

- Provide information for purchasing, production, and service

- Contain or reference product acceptance criteria

- Define essential characteristics for safe and proper use

- Be approved before their release

Perform systematic reviews of design and development at suitable stages in accordance with planned arrangements to:

- Evaluate the ability of the results to meet requirements

- The reviews must include representatives of the functions concerned with the stage being reviewed. Maintain the results of reviews and subsequent follow-up actions.

ISO 9001 Standards – Control of Measuring and Monitoring Equipment

ISO 9001 Standards - Control of Measuring and Monitoring Equipment

Determine the monitoring and measurements to be made, and the required equipment, to provide evidence of product conformity. Use and control the monitoring and measuring devices to ensure that measurement capability is consistent with monitoring and measurement requirements.

Where necessary to ensure valid results:

- Calibrate and/or verify the measuring equipment at specified intervals or prior to use

- Calibrate the equipment to national or international standards (or record other basis)

- Adjust or re-adjust as necessary

- Identify the measuring equipment in order to determine its calibration status

- Safeguard them from improper adjustments

- Protect them from damage and deterioration

Assess and record the validity of prior results if the device is found to not conform to requirements. Maintain records of the calibration and verification results.

Confirm the ability of software used for monitoring and measuring for the intended application before its initial use (and reconfirmed as necessary).

NOTE: Confirming the ability of software to satisfy the intended application would typically include its verification and configuration management to maintain its suitability for use.

For More Information Please Visit http://www.iso9001-standard.us