Sunday, November 22, 2009

ISO 9001 Standards – Control of Measuring and Monitoring Equipment

ISO 9001 Standards - Control of Measuring and Monitoring Equipment

Determine the monitoring and measurements to be made, and the required equipment, to provide evidence of product conformity. Use and control the monitoring and measuring devices to ensure that measurement capability is consistent with monitoring and measurement requirements.
Where necessary to ensure valid results:
- Calibrate and/or verify the measuring equipment at specified intervals or prior to use
- Calibrate the equipment to national or international standards (or record other basis)
- Adjust or re-adjust as necessary

- Identify the measuring equipment in order to determine its calibration status

- Safeguard them from improper adjustments

- Protect them from damage and deterioration

Assess and record the validity of prior results if the device is found to not conform to requirements. Maintain records of the calibration and verification results.

Confirm the ability of software used for monitoring and measuring for the intended application before its initial use (and reconfirmed as necessary).

NOTE: Confirming the ability of software to satisfy the intended application would typically include its verification and configuration management to maintain its suitability for use.

For More Information Please Visit http://www.iso9001-standard.us

Thursday, October 8, 2009

How To Implement ISO 9001 Standards Using Template & Softwares

There are few ways of implementing the ISO 9000 in a particular organization. One of the easy way is hiring a ISO 9000 consultant in a turn key project basis. This definitely will incur cost. However, some of the organization will appoiint an employee to start up the ISO 9000, by learning thru seminar, preparing the ISO 9000 Quality Manual, Procedure & Form by using some of the ISO 9000 Template sell at internet. Some of the provider such as http://www.iso-consults.com & http://www.quality-template.com are providing such services.
Normally, the template provide will provides the ISO 9000 Quality Manual Template, Standand Procedure & also sample form for the ISO 9000 implementation. One of the provider like http://www.e-wia.com give a very complete set of the ISO 9000 Templates, which will help an organization to implement the ISO 9000 easily.
There are also some ISO 9000 Softwares which helps the organization in the ISO 9000 implementation. Some of the ISO 9000 Software are listed below:
a. Document Control Software – Software which Helps the organization to keep track & control of the ISO 9000 Documents.
b. Audit Control Software – Software which helps the organization to keep track of internal & external audit events.
c. Training Record Management Software – Software which helps the organization to keep track of Training records in a system.
d. Calibration Software – Software to maintain the calibration records for tool & machinery.
More Sites on ISO 9001 Standards Template & Softwares are as below:
http://www.iso9001store.com
http://www.iso14000store.com

Friday, October 2, 2009

ISO 9000 Standard Books & Magazines

Here are some of the ISO 9000 & ISO 14001 related books & magazines available for online order.
1. ISO Management Systems – English Edition (Magazine Subscription) by Amazon
Format: Magazine
Shipping: Currently, item can be shipped only within the U.S.
Publisher: Iso Central Secretariat
ASIN: B00006KJFO
Iso Focus C-W Iso Management Systems – English ed
2. ISO Focus (Magazine Subscription) by Amazon
Magazine of the International Organization for Standardization providing a panoramic view of what is being done in international standardization, why it has been done and what will be done.
Format: Magazine
Shipping: Currently, item can be shipped only within the U.S.
Publisher: Iso Central Secretariat
ASIN: B0001MS4E6
Iso Focus
3. ISO 9000 Quarterly Report (Magazine Subscription) by Amazon
Format: Magazine
Shipping: Currently, item can be shipped only within the U.S.
Publisher: Rfp Report
ASIN: B00007J7K4
Iso 9000 Quarterly Report
4. A Basic Guide To ISO 14000 – Environment Management System (EMS) provides you with all of the basic information you need in ISO 14000 and ISO 14001:2004.
What is ISO14000
Benefits of ISO 14000
History of ISO 14000
ISO 14000 Certification
ISO 14000 Process Check List
Contents Of ISO 14001:2004
Key Elements Of ISO 14001:2004
Environment Management System Manual
AND MUCH, MUCH MORE!

ISO 9001 Software

Companies that need quality management systems realize that products like ISO 9001 software are important tools to insure their product safety, consistency and profitability. Using ISO 9001 software can help guarantee that any company can monitor productivity, customer satisfaction and product quality with reports that contain solid information.
This information is now vital to management in order for maximum efficiency in any industry. This is why ISO 9001 software is vital to any sized company. Continuous improvement means continuous profitability. Here are just a few reasons why:
o Companies increase sales because of better performance, quality, and delivery. This propels you ahead of your competition.
o ISO 9001 software helps retain employees and attract more highly qualified employees because they are assured of a controlled and consistent work environment.
o The experience of a more professional workplace boosts employee morale.
o Reduced operating costs dramatically increase your company’s productivity, leading to higher profitability.
o Customer satisfaction and higher profitability expand your market share and demand for your consistently higher product quality.
o When you’re compliant or certified to the appropriate standard, the businesses that work with you know that quality objectives, continuous improvement, and customer satisfaction are your goals.
Many companies require that their suppliers are ISO 9001 compliant; therefore, once you’re certified, your opportunities increase. ISO 9001 software has be utilized and has developed experience of helping manufacturing, service, and distribution organizations to be more efficient and more profitable through continuous improvement programs. We help you to implement the time-tested methods of continuous improvement to measure performance, analyze data, and apply the appropriate process changes. This includes using ISO 9001 software.
ISO 9001 software also offers a suite of modules to enable you to manage the document management and ISO 9001 Compliance Management process. These modules enable complete transparent system measurement with targeted action items ensuring all persons are notified of tasks and carry them out in a prompt and efficient manner. ISO 9001 software provides training in there software and also bring extensive experience in implementing the ISO 9001 software in various environments.

ISO 9001 Software

Companies that need quality management systems realize that products like ISO 9001 software are important tools to insure their product safety, consistency and profitability. Using ISO 9001 software can help guarantee that any company can monitor productivity, customer satisfaction and product quality with reports that contain solid information.
This information is now vital to management in order for maximum efficiency in any industry. This is why ISO 9001 software is vital to any sized company. Continuous improvement means continuous profitability. Here are just a few reasons why:
o Companies increase sales because of better performance, quality, and delivery. This propels you ahead of your competition.
o ISO 9001 software helps retain employees and attract more highly qualified employees because they are assured of a controlled and consistent work environment.
o The experience of a more professional workplace boosts employee morale.
o Reduced operating costs dramatically increase your company’s productivity, leading to higher profitability.
o Customer satisfaction and higher profitability expand your market share and demand for your consistently higher product quality.
o When you’re compliant or certified to the appropriate standard, the businesses that work with you know that quality objectives, continuous improvement, and customer satisfaction are your goals.
Many companies require that their suppliers are ISO 9001 compliant; therefore, once you’re certified, your opportunities increase. ISO 9001 software has be utilized and has developed experience of helping manufacturing, service, and distribution organizations to be more efficient and more profitable through continuous improvement programs. We help you to implement the time-tested methods of continuous improvement to measure performance, analyze data, and apply the appropriate process changes. This includes using ISO 9001 software.
ISO 9001 software also offers a suite of modules to enable you to manage the document management and ISO 9001 Compliance Management process. These modules enable complete transparent system measurement with targeted action items ensuring all persons are notified of tasks and carry them out in a prompt and efficient manner. ISO 9001 software provides training in there software and also bring extensive experience in implementing the ISO 9001 software in various environments.

Document and Data Control in ISO 9000 & ISO 14001

The organization shall establish and maintain procedures for controlling all documents and data required by ISO 9000 & ISO 14001
a) they can be located;
b) they are periodically reviewed, revised as necessary, and approved for adequacy by authorized personnel;
c) current versions of relevant documents and data are available at all locations where operations essential to the effective functioning of the OH&S system are performed;
d) obsolete documents and data are promptly removed from all points of issue and points of use, or otherwise assured against unintended use;
e) archival documents and data retained for legal or knowledge preservation purposes, are suitably identified.
Accidents, incidents, non-conformances and corrective and preventive action
The organization shall implement and record any changes in the documented procedures resulting from corrective and preventive action.
Documents required by the ISO 9000 & ISO 14001 shall be controlled. Records are a special type of document and shall be controlled in accordance with the requirements.
The organization shall establish, implement and maintain procedure[s] to:
a) approve documents for adequacy prior to use;
b) review and update as necessary and re-approve documents;
c) ensure that changes and the current revisions status of documents are identified;
d.) ensure that relevant versions of applicable documents are available at points of use;
e.) ensure that documents remain legible and readily identifiable;
f.) ensure that documents of external origin determined by the organization to be necessary for the planning and operation of the ISO 9000 & ISO 14001 management system are identified and their distribution controlled, and
g.) prevent the unintended use of obsolete documents and apply suitable identification to them if they are retained for any purpose.

Tuesday, September 29, 2009

ISO 9001:2008 Documentation Requirements

ISO 9001:2008 Documentation Requirements
ISO 9001:2008 clause 4.1 General requirements requires an organization to “establish, document, implement, and maintain a quality management system and continually improve its effectiveness in accordance with the requirements of this International Standard”
Clause 4.2.1 General explains that the quality management system documentation shall include:
documented statements of a quality policy and quality objectives;
a quality manual documented procedures required by this International Standard documents needed by the organization to ensure the effective planning, operation and control of its processes, and records required by this International Standard;
The notes after Clause 4.2 make it clear that where the standard specifically requires a “documented procedure”, the procedure has to be established, documented, implemented and maintained. It also emphasizes that the extent of the QMS documentation may differ from one organization to another due to:
the size of organization and type of activities;
the complexity of processes and their interactions, and
the competence of personnel.
All the documents that form part of the QMS have to be controlled in accordance with clause 4.2.3 of ISO 9001:2008, or, for the particular case of records, according to clause 4.2.4.
Comments (0)
Guidance on Clause 4.2 of ISO 9001:2008
Posted by everise iso 9001 standard Monday 28 September 2009 8:51 am Edit This
Guidance on Clause 4.2 of ISO 9001:2008
The following comments are intended to assist users of ISO 9001:2008 in understanding the intent of the general documentation requirements of the International Standard.
a) Documented statements of a quality policy and objectives:
Requirements for the quality policy are defined in clause 5.3 of ISO 9001:2008. The documented quality policy has to be controlled according to the requirements of clause 4.2.3.
Note: Organizations that are revising their quality policy for the first time, or in order to meet the amended requirements in ISO 9001:2008, should pay particular attention to clause 4.2.3 (c), (d) and (g).
Requirements for quality objectives are defined in clause 5.4.1 of ISO 9001:2008. These documented quality objectives are also subject to the document control requirements of clause 4.2.3.
b) Quality Manual:
Clause 4.2.2 of ISO 9001:2008 specifies the minimum content for a quality manual. The format and structure of the manual is a decision for each organization, and will depend on the organization’s size, culture and complexity. Some organizations may choose to use the quality manual for other purposes besides that of simply documenting the QMS
A small organization may find it appropriate to include the description of its entire QMS within a single manual, including all the documented procedures required by the standard.
Large, multi-national organizations may need several manuals at the global, national or regional level, and a more complex hierarchy of documentation.
The quality manual is a document that has to be controlled in accordance with the requirements of clause 4.2.3.
c) Documented procedures:
ISO 9001:2008 specifically requires the organization to have “documented procedures” for the following six activities:
4.2.3 Control of documents
4.2.4 Control of records
8.2.2 Internal audit
8.3 Control of nonconforming product
8.5.2 Corrective action
8.5.3 Preventive action
These documented procedures have to be controlled in accordance with the requirements of clause 4.2.3 Some organizations may find it convenient to combine the procedure for several activities into a single documented procedure (for example, corrective action and preventive action). Others may choose to document a given activity by using more than one documented procedure (for example, internal audits). Both are acceptable.
Some organizations (particularly larger organizations, or those with more complex processes) may require additional documented procedures (particularly those relating to product realization processes) to implement an effective QMS.
Other organizations may require additional procedures, but the size and/or culture of the organization could enable these to be effectively implemented without necessarily being documented. However, in order to demonstrate compliance with ISO 9001:2008, the organization has to be able to provide objective evidence (not necessarily documented) that its QMS has been effectively implemented.
d) Documents needed by the organization to ensure the effective planning, operation and control of its processes:
In order for an organization to demonstrate the effective implementation of its QMS, it may be necessary to develop documents other than documented procedures. However, the only documents specifically mentioned in ISO 9001:2008 are:
- Quality policy (clause 4.2.1.a)
- Quality objectives (clause 4.2.1.a)
- Quality manual (clause 4.2.1.b)
There are several requirements of ISO 9001:2008 where an organization could add value to its QMS and demonstrate conformity by the preparation of other documents, even though the standard does not specifically require them. Examples
may include:
- Process maps, process flow charts and/or process descriptions
- Organization charts
- Specifications
- Work and/or test instructions
- Documents containing internal communications
- Production schedules
- Approved supplier lists
- Test and inspection plans
- Quality plans
All such documents have to be controlled in accordance with the requirements of clause 4.2.3 and/or 4.2.4, as applicable
e) Records:
Examples of records specifically required by ISO 9001:2008 are presented in Annex B.
Organizations are free to develop other records that may be needed to demonstrate conformity of their processes, products and quality management system.
Requirements for the control of records are different from those for other documents, and all records have to be controlled according to those of clause 4.2.4 of ISO 9001:2008.
Comments (0)
Demonstrating conformity with ISO 9001:2008
Posted by everise iso 9001 standard Monday 28 September 2009 8:40 am Edit This
Demonstrating conformity with ISO 9001:2008
For organizations wishing to demonstrate conformity with the requirements of ISO 9001:2008, for the purposes of certification/registration, contractual, or other reasons, it is important to remember the need to provide evidence of the effective implementation of the QMS.
Organizations may be able to demonstrate conformity without the need for extensive documentation.
To claim conformity with ISO 9001:2008, the organization has to be able to provide objective evidence of the effectiveness of its processes and its quality management system. Clause 3.8.1 of ISO 9000:2005 defines “objective
evidence” as “data supporting the existence or variety of something” and notes that “objective evidence may be obtained through observation, measurement, test, or other means.”
Objective evidence does not necessarily depend on the existence of documented procedures, records or other documents, except where specifically mentioned in ISO 9001:2008. In some cases, (for example, in clause 7.1(d)
Planning of product realization, and clause 8.2.4 Monitoring and measurement of product), it is up to the organization to determine what records are necessary in order to provide this objective evidence.
Where the organization has no specific internal procedure for a particular activity, and this is not required by the standard, (for example, clause 5.6 Management Review), it is acceptable for this activity to be conducted using as a basis the relevant clause of ISO 9001:2008. In these situations, both internal and external audits may use the text of ISO 9001:2008 for conformity assessment purposes.